Bandsaw blade questions?

[CGCINC]

I have always just found the length I needed and the TPI that I wanted and bought that saw blade.

I just ordered a few more and saw this in the description: "Regular Tooth, Wavy Set, Neutral Rake"
So what does this all mean and how can different combinations of "tooth, wave or no wave and rake" help or hurt as far as general cutting?

[cbmkr]

Here is a link to SuperCut's web site, They sell very good quality blades that i have used for years. There are explanations for different types of blades and applications.

http://www.supercutbandsaw.com/how_to_choose.html

[CGCINC]

Here is a link to SuperCut's web site, They sell very good quality blades that i have used for years. There are explanations for different types of blades and applications.

http://www.supercutbandsaw.com/how_to_choose.html

Thanks for the link, good info!
It didn't say anything about the type of blade as far as "Regular Tooth, Wavy Set, Neutral Rake"

[Trip59]

Really depends on the type of material. Look at a hacksaw blade as an example, when you see the ripples and look closer and see the teeth on the ripples, that's wavy, it makes a larger kerf and clears material easier. I might use this for something that expands quickly when heated, as you get a bit wider kerf and more clearance, and the waves hit alternately generating more heat. Rake angle will determine how aggressive each tooth is.



Top is a neutral rake, bottom would be negative rake, a positive rake would look more like a hook.

[Rambozo]

Thanks for the link, good info!
It didn't say anything about the type of blade as far as "Regular Tooth, Wavy Set, Neutral Rake"

Have a look here.

http://www.ellissaw.com/Band-Saw-Bla...oth-types-sets

[CGCINC]

Have a look here.

http://www.ellissaw.com/Band-Saw-Bla...oth-types-sets

That helps me "Get it". Thanks, and thanks to all!

[jakeru]

There's some good additional info in the "Lenox Guide to Band Sawing" at:
http://www.lenoxtools.com/Guides/LEN...d%20Sawing.pdf

[Rambozo]

There's some good additional info in the "Lenox Guide to Band Sawing" at:
http://www.lenoxtools.com/Guides/LEN...d%20Sawing.pdf

Nice guide, Thanks.
I think there is a typo in it, though. The alternate, and wavy set have the pictures swapped.

[CGCINC]

There's some good additional info in the "Lenox Guide to Band Sawing" at:
http://www.lenoxtools.com/Guides/LEN...d%20Sawing.pdf

That is a LOT of info on blades, design, cutting.... Very nice!!! thanks!

[casper]

I have always just found the length I needed and the TPI that I wanted and bought that saw blade.

I just ordered a few more and saw this in the description: "Regular Tooth, Wavy Set, Neutral Rake"
So what does this all mean and how can different combinations of "tooth, wave or no wave and rake" help or hurt as far as general cutting?

Regular tooth has a zero rake angle for general-purpose cutting ; the wavy set helps to prevent stripping for making thinner cuts .
The role of Regular Tooth, Wavy Set, Neutral Rake affects the type of finish and may be constant or variable .
And that makes sense.