Share
Page 1 of 5 123 ... LastLast
Results 1 to 20 of 140

Thread: New winter time fun contest: November 19 2012- february 28 2013

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default New winter time fun contest: November 19 2012- february 28 2013

    We're starting up the Winter Time Contest. The Posting requirements are basically the same as in the past. But we want you to have the maximum fun during the time cabin fever tends to set in. Contest starts November 19th 2012 and ends February 28th at 11:59 pm.

    As we said requirements are typically as usual, but be sure to read the details. Please don't be asked to "add" you in if you fail to meet the posting requirements or miss the directions. You will need 100 posts to qualify for entry and will count as 1 entry. Project posts can count toward the 100 posts.
    This time we are looking for Projects based in categories, each good for an entry. Only one project per category though to keep it fair, but a project in each category will each count as an entry, good for a total of 5 entries. Choose a possible maximum 5 of 7 categories. Please use at least 5 photos with a description of the process, materials used, dimensions, or special challenges encountered.

    We are looking for qualifying NEW, previously unpublished projects in the following categories. Please do not recycle old content:

    1) Welding Carts
    2) Welding Tables
    3) Custom Automotive on/off road Welding: i.e. exhaust systems, frames, buggies etc.
    4) Custom welded Shop tools and improvements: i.e. overhead lifts, stairs, presses, or anything used to help out around the shop.
    5) Decorative Metal Art
    6) General Welding repair
    7) Barbeque Grills/Cookers
    8) Like us on any social media.

    This is NEW!

    Post any video featuring an Everlast product either as a review or with a prominent presence on Youtube, Vimeo or other video site and receive 2 entries. You may post up to 3 videos good for a total of 6 entries.

    This is means you could have up to a maximum number of 12 entries by the contest end.

    In the title of each project follow the following form:

    Project 1 from Performance. Category: Welding Cart

    The PRIZE:

    Green Bucks are awarded once again which are good toward the purchase of an Everlast Product of the winning Customer's choice:
    1st prize 1500.00 of Everlast Greenbucks
    2nd prize 750.00 of Everlast Green bucks
    3rd prize 250.00 of Everlast Green bucks
    All the rest of the people who meet the 100 post mark will receive a 20% discount on their next purchase. These are not to be used (stackable) with previous contests or discounts. One discount per purchase will be allowed.

    AS ALWAYS SPAMMING IS STRONGLY DISCOURAGED. PLEASE DO NOT MAKE COMMENTS WITHOUT SUBSTANCE. NO "GOOD JOB" OR "COOL PROJECT" SINGLE COMMENT POSTS PLEASE!
    ALSO, POSTS THAT ARE DELETED (AND THEY WILL BE) BECAUSE OF IRRELEVANCE, OFF TOPIC, OR INSULTING CONTENT WILL NOT BE COUNTED. SO PLEASE KEEP IT CLEAN AND ON POINT.


    How to make official entry, and how to fulfill requirements:
    1) Enter here on this thread, by declaring you are entering the contest. State starting post count.
    2) By the end of the contest, revisit this thread and state that your ending post count, and post links to each project and summarize your "shares" and dates/items shared.

    Legal Stuff:

    By entering this contest, the winning entrants agrees to keep and maintain the Everlast unit(s) purchased with the Green bucks and not to sell or otherwise divest the unit for a period of 2 years. Also, by entering, the entrant agrees to be used as a reference for up to two years and his/her promotion and their likeness and comments be used in any future promotional literature. Everlast may ask for the entrant’s honest, heartfelt comments about the “prize” unit after a period of time to be used in evaluation, product improvement and promotions. No actual cash compensation will be made to the contest winner. The winning entrant also agrees to hold Everlast harmless /blameless against any, death, injury, loss of time, or other damage or inconvenience while using an Everlast product or by entering this contest. Everlast is not responsible for paying any applicable state, federal or local taxes that may be incurred from the winnings of this promotion and the winning entrant agrees to assume any tax responsibility and shipping incurred. Odds of winning are dependent upon the actual number of qualified entries received by the deadline date and time. By entering this contest, the contestant acknowledges and agrees to the terms and conditions of this contest. Final determination of eligibility is conditioned upon meeting the above criteria and the decision rests with Everlast.

    Contestants must be 1) Either be legally residing in the continental US or Alaska OR 2) pay shipping costs and any duty or taxes due.

    PLEASE KEEP THIS THREAD FOR ENTRIES ONLY. IF YOU HAVE QUESTIONS, COMMENTS, DISCUSSIONS OR PROBLEMS, POST IN A SEPARATE THREAD THAT WILL BE OPENED OR PM ONE OF THE FORUM ADMINS OR MODERATORS. PLEASE DO NOT USE THIS THREAD FOR GENERAL DISCUSSION. COMMENTS OR POSTS OUTSIDE OF THE ENTRY WILL LIKELY BE DELETED, AND THOSE POSTS WILL NOT BE COUNTED.

    REMEMBER YOU MUST OFFICIALLY POST HERE FIRST TO STATE THAT YOU ARE ENTERING THE CONTEST ALONG WITH THE CURRENT POST COUNT. NOT READING OR FOLLOWING THE DIRECTIONS OF THIS CONTEST WILL VOID THE ENTRY.

    AS ALWAYS, PLEASE ADD AN AVATAR AND FILL IN YOUR SIGNATURE LINE TO PARTICIPATE IN THIS CONTEST. ALMOST ALL EXISTING MEMBERS HAVE THEM, BUT NEWCOMERS MAY NOT. PLEASE ADD THEM TO BE COUNTED IN THE CONTEST. IF YOU HAVE QUESTIONS ABOUT HOW TO DO IT, JUST VISIT THE ABOVE MENTIONED THREAD, IN THE STICKIES OF THIS SECTION!

    Thanks all, and happy posting.
    From the Everlast Sales Team.
    Last edited by performance; 11-19-2012 at 04:33 PM.

  2. #2

    Default

    I am in for the New winter time fun contest, Starting Post Count 213
    PowerTig 200DX
    Supercut 50P
    PowerTig Micro 185 SOLD GREAT MACHINE
    Millermatic 200
    Miller Thunderbolt
    Jet 1340 Lathe
    Jet 20" Drill Press
    Jet 12" Wet Band Saw
    Kalamazoo H7 Bandsaw
    Forward 12,000 lb 4 Post Lift

  3. #3

    Default

    I am entering with 601 posts.

    John
    Everlast 200DX
    Everlast PT185
    Shoptask 3-in-1 (not currently in my garage, but I own it...)

    Any day on a motorcycle like this that ends just needing parts and labor is a good day.
    4.82, 158.67mph 1/8th mile 7.350, 200.35mph 1/4 mile

  4. #4
    Join Date
    May 2012
    Location
    Disneyland
    Posts
    2,662

    Default

    Count me in with 702.
    Long arc, short arc, heliarc and in-the-dark!

  5. #5

    Default

    Count me in - post count - 133

  6. Default

    Count me in. This should be post #4 for me.

  7. Default

    I'm in starting posts 209.
    PowerPro 205
    9" South Bend Lathe
    Enco Mill/Drill
    Evolution Rage 2

  8. #8

    Default

    I'm entering at post 1144.
    2013 250EX : SSC Pedal : I-MIG 250P 20' Profax gun : Power Plasma 60 p80 torch : 3M Speedglas 9100XX : Evolution Rage 3 DB cold saw

  9. #9

    Default

    I'm in with 432 posts ... good luck to all my friends!
    Powertig 200DX
    Lincoln 180c
    Hobart Handler 125
    Miller Thunderbolt
    and a bunch of other tools

  10. #10

    Default

    Count me in. This should be post # 208
    Everlast PowerTig 200DX
    Everlast Supercut 50P
    I need a MIG.... which one to buy:
    I-Mig 160, I-Mig 200, or a MTS 160

  11. #11

    Default

    I am in at 902!
    Lincoln Eagle Engine Drive
    Everlast MTS 250
    Everlast Power Tig 225lx
    HTP Mig 2400
    Everlast Power Plasma 60C --> Just need to finish my CNC Plasma Table!
    Miller Spectrum 375 Extreme Plasma cutter
    Victor cutting torch
    HF 20 Ton Shop Press
    HF 4x6 Band Saw
    HF Air Compressor
    Northern Tool Drill Press


    www.murphywelding.com

  12. #12
    Join Date
    Oct 2010
    Location
    Northern Virginia
    Posts
    1,323

    Default

    Zoom! I'm in, starting at 695. Thanks, Everlast!
    DaveO
    Oxweld oxy acet gear
    IMIG 200
    PowerTIG 210 EXT... Amazing!

  13. #13
    Join Date
    Sep 2011
    Location
    Middleburg Florida
    Posts
    556

    Default

    I'm in with 421 posts (or this is 422) I have to admit, I'm a bit mad at myself, posted the idea for the cart, didn't get to do enough on it to get it in the last contest... my wonderful timing strikes again!

    Oh well, lots of fun stuff planned for the next few months, hopefully I can hit the rest of the categories
    Trip Bauer
    Former USN HT
    Everlast 200DX New Model
    Hobart Handler 125 MIG
    Van Norman #12
    Atlas 12" engine lathe
    '98 RoadKing - 84 Ironhead - 59 Ironhead

  14. #14
    Join Date
    Sep 2011
    Location
    Middleburg Florida
    Posts
    556

    Default

    Started with 421, ended at 530.

    1 - 100 posts
    1 - social media
    1 - Project 1 from Trip. Category: Custom welded Shop tools and improvements
    1 - Project 2 from Trip. Category: Welding Cart
    1 - Project 3 from Trip. Category: On Road Fabrication
    1 - Project 4 from Trip. Category: General Welding repair
    1 - Project 5 from Trip. Category: Metal Art

    Looks like 7 for me, I'd hoped to get some videos done, but a few things conspired against me this round.
    Trip Bauer
    Former USN HT
    Everlast 200DX New Model
    Hobart Handler 125 MIG
    Van Norman #12
    Atlas 12" engine lathe
    '98 RoadKing - 84 Ironhead - 59 Ironhead

  15. #15
    Join Date
    Oct 2012
    Location
    Canada, Suttonwest, Ontario
    Posts
    676

    Default

    Count me in this should be #15 and 100 to go.

  16. #16
    Join Date
    Dec 2009
    Location
    Greater Seattle, WA
    Posts
    813

    Default

    In at 698.
    '13 Everlast 255EXT
    '07 Everlast Super200P

  17. #17
    Join Date
    Nov 2012
    Location
    Cambridge, ON. CA
    Posts
    111

    Default

    Alright! Count me in with 8 posts. Good luck to everybody and let the fun begin!
    PowerArc 140ST
    Victor VPT-100FC

  18. #18
    Join Date
    Nov 2012
    Location
    Whine Country, California
    Posts
    442

    Default

    Sweet! I'll give this contest a "whirl". This will be post #2 for me.
    Andy
    New Everlast PowerTig 250EX that is begging for me to come up with a few welding projects so it can stretch it's legs. Did someone say aluminum???

    MISC. TOOLS:
    Atlas 618 lathe
    Milwaukee Porta Band with custom made stand
    Dewalt 4-1/2" angle grinder
    Dewalt 14" chop saw

    Strong Hand Nomad portable table
    Juki sewing machine I've had for years (yes I know sewing is for girls)

  19. #19

    Default

    Count me in with 15 posts
    EverLast 140ST
    PowerPlasma 50
    No You Can't Use Them

  20. #20
    Join Date
    Oct 2011
    Location
    Litchfield Park, AZ
    Posts
    370

    Default

    Count me in 228 posts.
    Miller 252
    PowerTig 250 EXT
    Evolution Rage 2
    48X6 inch Belt Sander w/ 9 inch Disk Sander
    ...

Similar Threads

  1. 2013 Summer Time Contest. June 21- October 1 2013
    By performance in forum Everlast Announcements, Contests and Promotions
    Replies: 54
    Last Post: 04-12-2014, 03:42 AM
  2. Replies: 0
    Last Post: 02-25-2013, 05:11 PM
  3. Project 3 from DVA: BBQ Winter Time Fun Contest
    By DVA in forum Other Custom Fabrications
    Replies: 12
    Last Post: 02-25-2013, 05:10 AM
  4. Questions about the New winter time fun contest
    By youngnstudly in forum Everlast Announcements, Contests and Promotions
    Replies: 6
    Last Post: 02-22-2013, 06:41 PM
  5. winter time contest Q: does this count as a video for the contest?
    By Spike in forum Everlast Announcements, Contests and Promotions
    Replies: 3
    Last Post: 01-21-2013, 05:16 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •