NEW 2013 EVERLAST PowerTig 255 EXT AC/DC DIGITAL TIG WELDER

[JimMinKent]

Thanks Mark,

If it uses quick taps, that's fine, it's pressing and holding for x number of seconds that I am not a fan of.

My thinking on the knob is, since it only has one,and it is nearly the entire interface, let's make it a nice one Even the current 250EX amp knob is a bit nicer than the one shown in the photos of the 255. After all, this is your top-level entry in the US, right? Thanks for whatever you can do for us.

Jim

[performance]

I don't have anything to do with that at this point. That detail would be for Duncan. He has his hands on the digital units in the factory. I have no idea. It will be whatever is available to fit the encoder that is used. They don't fit the same. To special make one would involve a lot of expense and planning.

It'll likely be this knob or a cut down version of it:

[Oleg]

UPDATE:


http://www.everlastgenerators.com/fo...werTig-255-EXT

[Gwaltnak]

Any updates? Haven't heard anything in a while.

[Oleg]

Hey guys

We waiting on FINIAL OK from the PROS

[JimMinKent]

Alright then, here's my OK. I don't have the machine yet, of course, but if we're just waiting on OK's, here's one to start off with: OKAY I'd give a thumbs up, too, if you need some of those.

Ready in Kent,
Jim

[Oleg]

Alright then, here's my OK. I don't have the machine yet, of course, but if we're just waiting on OK's, here's one to start off with: OKAY I'd give a thumbs up, too, if you need some of those.

Ready in Kent,
Jim

Hey Jim

waiting from OK from Jody and Mr Tig

[johnnymg]

Hey Jim

waiting from OK from Jody and Mr Tig

It's very reassuring (and impressive) that Everlast is taking the "long view" on this new welder. IMO, this cautious approach is the best way to gain market share!

best to all
JohnG

[Oleg]

Hey guys

Finial OK from pros will be next Friday

If both will say ok and I am sure it will be

We good to go !

Oleg



Oleg Gladshteyn
Oleg@everlastwelders.com
415 613 6664 cell

[zippitta]

Well as soon as they are OKed I will be giving you a call to place my order Oleg.

[Jason]

Hey guys

Finial OK from pros will be next Friday

If both will say ok and I am sure it will be

We good to go !

Oleg



Oleg Gladshteyn
Oleg@everlastwelders.com
415 613 6664 cell

Thats great news. I am getting ready to start a project that will need a Tig welder and maybe this will arrive just in time.

[redbeard]

Hey guys

Finial OK from pros will be next Friday

If both will say ok and I am sure it will be

We good to go !

Oleg



Oleg Gladshteyn
Oleg@everlastwelders.com
415 613 6664 cell

Will they be in the batch that Duncan is on his way to oversee now?

[Mr120]

Hey guys

Finial OK from pros will be next Friday

If both will say ok and I am sure it will be

We good to go !

Oleg



Oleg Gladshteyn
Oleg@everlastwelders.com
415 613 6664 cell

Wow! I can't wait to see and hear more about this welder.

[Kempy]

Hey guys

Finial OK from pros will be next Friday

If both will say ok and I am sure it will be

We good to go !

Oleg

Are Jody and Mr. Tig going to make video's about the new PowerTig 255EXT?

[Oleg]

Kempy

Yes they will .. Maybe even FEW

Oleg



Oleg Gladshteyn
Oleg@everlastwelders.com
415 613 6664 cell

[Jason]

Kempy

Yes they will .. Maybe even FEW

Oleg



Oleg Gladshteyn
Oleg@everlastwelders.com
415 613 6664 cell

Sweet, I will be hovering jody's youtube again now

[Kempy]

Kempy

Yes they will .. Maybe even FEW

Oleg

So has Everlast been working on the manual for the 255EXT since they got the new units for testing.

[performance]

No, since the manual writer doesn't have one to test yet.

[Kempy]

No, since the manual writer doesn't have one to test yet.

So does that mean that Jody and Mr. Tig are going to figure out all the options of the 255EXT with out a manual it took a long time to figure out the code 802 on my MTS250S with a manual and help from the Everlast forum.

[performance]

Honestly, Kempy,

That's a minor concern. Both these guys are pretty quick on the uptake. It doesn't take a rocket scientist to operate a welder like this. A quick phone call is all it takes to clarify anything or ask a question if they need to.