Originally Posted by
performance
Honestly, Kempy,
That's a minor concern. Both these guys are pretty quick on the uptake. It doesn't take a rocket scientist to operate a welder like this. A quick phone call is all it takes to clarify anything or ask a question if they need to.
Honestly Mark
That's why it took two weeks and a lot of back and fourth on the forum with all the Everlast team and members of the forum and emails I sent that never did not get answered. It took a lot of work too finally figure out it was not me but the machine. Having the machine replaced by Everlast Canada, now problem free it works very well thanks to Everlast Canada and Duncan and Everlast USA also trying to help. MANUAL'S do have mistakes in them typos and human errors hard to work with the wrong information. I imagine that Jody and Mr. Tig have more resources then I would ever have.
Last edited by Kempy; 07-16-2013 at 10:40 PM.
Reason: mistakes
Everlast PowerTig 325EXT (Canada)
Everlast Power I Mig 250 (Canada)
Everlast PowerPlasma 80S (Canada)
Everlast PowerCool W300 (Canada)
Everlast PowerMTS 250S Fitted with a 30A Spoolgun(Canada)
Miller Dynasty 400 wireless(Canada)
Millermatic 252 plus 30A Spoolgun(Canada)
Reply With Quote