Share
Results 1 to 12 of 12

Thread: new video

  1. #1

    Default new video

    Yea. I know ... it's just a generic video anyone who knows anything can do ... and it was sloppy ... but it was fun to make ... http://youtu.be/GQrvWBsMFJA and it does have original music at least.
    Last edited by Winky; 12-04-2012 at 03:01 AM. Reason: for smileys
    Powertig 200DX
    Lincoln 180c
    Hobart Handler 125
    Miller Thunderbolt
    and a bunch of other tools

  2. Default

    Have you made any more stuff with your Tig welder? Saw some of your art, very nice.

  3. #3

    Default

    Very nice video. But the music.... ahem...
    Purple Fabricator 211i

  4. #4

    Default

    Quote Originally Posted by 225 View Post
    Very nice video. But the music.... ahem...
    Sorry about that. Maybe you'll like the music in these two videos better http://youtu.be/tnhZ8CuCyDk ... http://youtu.be/S9pLSB-Ds64
    Remember music taste is subjective personally I like everything from easy listening to jazz to rock to classical but not real found of rap. hip hop or pop but then what do I know I was only a music major com in college who graduated with a 3.4 GPA ... I write, arrange, produce, engineer and perform everything myself (with the exception of a few drum loops). I can play any style there is but why should I spend my time with sound that is not pleasing to me. Have a great day my friend.
    Last edited by Winky; 12-11-2012 at 02:11 PM.
    Powertig 200DX
    Lincoln 180c
    Hobart Handler 125
    Miller Thunderbolt
    and a bunch of other tools

  5. #5

    Default

    Quote Originally Posted by vicrc View Post
    Have you made any more stuff with your Tig welder? Saw some of your art, very nice.
    Yes I have just haven't had time to make a video other than the rose one.
    Powertig 200DX
    Lincoln 180c
    Hobart Handler 125
    Miller Thunderbolt
    and a bunch of other tools

  6. #6

    Default

    I dont think the music fits the theme of the video. But other than that I must say good job on both if they were provided to me separately.
    2013 PT-200DX
    Ryobi Drill Press
    8" Shear
    6" Bench Grinder
    4x8 CNC Plasma Table

  7. #7

    Default

    Quote Originally Posted by zedron View Post
    I dont think the music fits the theme of the video. But other than that I must say good job on both if they were provided to me separately.
    Thanks ... that's probably accurate but the music is just there to cover up low level shop noise (except in the motorcycle art slide shows). I've written a lot of stuff in different styles but not all is usable because of licensing issues and timing ... I try to install music beds that match the run time of the videos. I have made videos without music beds and some with stronger harder driving sound but if I'm talking it sometimes detracts from the dialog or distracts from specific points I'm trying to make. I could use music beds made by other people and licensed for use but then it would no longer be solely my project ... there is a method to my madness and a madness to my method ... thanks for the feedback ... I appreciate everyone's opinion.
    Powertig 200DX
    Lincoln 180c
    Hobart Handler 125
    Miller Thunderbolt
    and a bunch of other tools

  8. #8

    Default

    Quote Originally Posted by zedron View Post
    I dont think the music fits the theme of the video. But other than that I must say good job on both if they were provided to me separately.
    Is this what you had in mind? I opened up an easy listening channel just for this kind of stuff http://youtu.be/DTxq0mf8VSM
    Powertig 200DX
    Lincoln 180c
    Hobart Handler 125
    Miller Thunderbolt
    and a bunch of other tools

  9. #9

    Default

    Put together a little intro video for Winky Enterprises ... sorry abut the Beethoven theme in the background ... it's just my background LOL http://youtu.be/1IwYYvij6FQ
    Powertig 200DX
    Lincoln 180c
    Hobart Handler 125
    Miller Thunderbolt
    and a bunch of other tools

  10. #10

    Default

    Like the music on the new video Winky. Good job.
    2013 PT-200DX
    Ryobi Drill Press
    8" Shear
    6" Bench Grinder
    4x8 CNC Plasma Table

  11. #11

    Default

    Quote Originally Posted by zedron View Post
    Like the music on the new video Winky. Good job.
    Thanks ... I know my music isn't for everyone ... when I was younger I was only into rock but nw that I'm pushing 60 I tend to be more open minded. I'm afraid that anymore when I listen to music on the radio I tend to look for classical, easy listening or oldies station ... I have PTSD and it tends to keep me focused. Maybe for future videos I'll just put something in for the intro and do the bulk w/o anything ... I don't know, I do like having a music bed in the background.
    Last edited by Winky; 12-22-2012 at 07:47 AM.
    Powertig 200DX
    Lincoln 180c
    Hobart Handler 125
    Miller Thunderbolt
    and a bunch of other tools

  12. #12

    Default

    Here is my latest video ... and I only use my music for intro and exit this time ... short and to the point ... enjoy http://youtu.be/PA5wGX3lsc0
    Powertig 200DX
    Lincoln 180c
    Hobart Handler 125
    Miller Thunderbolt
    and a bunch of other tools

Similar Threads

  1. MIG video
    By Rambozo in forum MIG Welding (GMAW/GMAW-P/FCAW)
    Replies: 6
    Last Post: 02-02-2013, 05:53 AM
  2. new Power Arc 200 Video
    By Tasha71822 in forum Stick Welding (SMAW)
    Replies: 0
    Last Post: 12-26-2011, 08:22 AM
  3. Video demonstrations
    By jericho777 in forum Forum related Questions
    Replies: 38
    Last Post: 01-24-2010, 05:06 PM
  4. any video of......
    By macdarren in forum Everlast Plasma Cutters (PAC)
    Replies: 2
    Last Post: 12-05-2009, 07:28 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •