Stocking Stuffer TIG CONSUMABLE KIT

[Titan winch]

JUST IN TIME FOR CHRISTMAS PICK UP THIS TIG CONSUMABLE KIT FOR YOUR STOCKING STUFFER.
$45.00 SHIPPING INCLUDED
Shipping is free to the lower 48 States and Canada.

[cbmkr]

Any chance of making up a gas lens kit for 9 20 torches , and 17 18 26 also

[zedron]

Any chance of making up a gas lens kit for 9 20 torches , and 17 18 26 also

This x10000

[Titan winch]

Here is the WP9 , 20 Gas lens kit . $45.00 shipping included

[Gerry]

JUST IN TIME FOR CHRISTMAS PICK UP THIS TIG CONSUMABLE KIT FOR YOUR STOCKING STUFFER.
$45.00 SHIPPING INCLUDED
Shipping is free to the lower 48 States and Canada.

Got any thing for the Plasma Cutters

[redbeard]

Nice looking little kits. Are those 6" or 7" tungstens?

[Titan winch]

Nice looking little kits. Are those 6" or 7" tungstens?

the tungsten is 6"

I will look into putting together a package for Plasma consumables along with a wheeled guide .
Cheers

[willida]

IS an option available for the Gas lens kit to have a clear pyrex cup included?

[zoama]

IS an option available for the Gas lens kit to have a clear pyrex cup included?

Clear pyrex is only for the push on style lens. A standard gas lens is threaded so I don't believe that's an option at this time.

[willida]

Thanks Zoama, still figuring out what is what.

[Jason]

Do you sell just collets and collet bodies?

[Tanh]

Clear pyrex is only for the push on style lens. A standard gas lens is threaded so I don't believe that's an option at this time.

So far I've only seen the pyrex with the CK gas saver kit. Is there another option from another company? Don't want to hijack the thread but since Duncan is local, it'll be a better option than ordering online. I mentioned in another thread that I was going for the gas saver look for the wp17v torch that came with the welder.

[zoama]

So far I've only seen the pyrex with the CK gas saver kit. Is there another option from another company? Don't want to hijack the thread but since Duncan is local, it'll be a better option than ordering online. I mentioned in another thread that I was going for the gas saver look for the wp17v torch that came with the welder.

Not that I'm aware of.

[JimMinKent]

CK does make slip-on ceramic (alumina) cups for their Gas Saver front end. I've got a few sizes #4, #6, etc. for the 2-Series torch, plus a couple different lengths of pyrex, and a set for my gas-cooled torches.

See them here: http://www.ckworldwide.com/gas_saver.pdf

Jim

[willida]

I got my gas lens kit for my CK 130 amp toch.
Thanks Jeane

[Titan winch]

Do you sell just collets and collet bodies?

Yes we stock collets ,ceramics , gas lenses etc.
Sorry for the late reply to this question but I sometimes have difficulty getting on the site when I am at the Factory . Admin blocks my IP address from my hotel and it is easy for me to miss a post or question such as this.
Cheers
Duncan