New Owner of PT 200DX

[ShaneJackson]

For your first time on AL that weld looks very good.

[alcoolaid]

For your first time on AL that weld looks very good.

Thanks!

I turned the AC balance down to 35% as per Rambozo's post and it welds so good now! Went up to around 125hz AC frequency and I got a nice tighter cone.

Here is a pic of me playing around with the settings. Put 2x 36" filler rods into it.

[everlastsupport]

If you read our forum, you will find 120Hz and 30% is the starting range for aluminum. Maybe something for the manual if not there. But posted many time...

The first picture was not at 65% either, you would have a lot more etching.

[alcoolaid]

If you read our forum, you will find 120Hz and 30% is the starting range for aluminum. Maybe something for the manual if not there. But posted many time...

The first picture was not at 65% either, you would have a lot more etching.

First picture was 60-65%.