NEW 2013 EVERLAST PowerITig 200T DC DIGITAL PULSE TIG WELDER LOW 2AMP START !

[performance]

One final announcement that we have to post up about the 2013 models...Another digital unit.

One of the best niche units we have in our stable is the i-TIG 200. It's found a big following by guns smiths and other specialty manufacturers. It's a reliable, hard working unit with a LOT of capability.

So we have considered what we can do to make a better product and improve performance and features. So we have developed a completely new I tig 200, which will fall into the digital lineup of welders that we have. It'll have similar features as the 255 EXT but as the i-tigs are DC only, it too will be DC only.

ONE very special thing it will have is the ability to fire off at an incredible 2 amps. We've studied the market and found that there is a need for this extremely low ignition point for guys that have molds and similar products to repair. It's been a constant request, so we've added this major capability to the unit.

Here are some comparative specs next to the current i-tig...

Model	Power-ITIG 200	Power-ITIG 200T
Input Voltage	110/220V 50/60 Hz	220 V 50/60 Hz
Rated Output	200 A	200 A
OCV	60-80V	60-80 V
Duty cycle	35%@200 amps	35% @ 200 amps
Welding range	5-200A TIG 5-160A Stick	2-200 A TIG 2-160A Stick
Arc Force	0-10	1-100
Pulse amps	5-95%	2-200 amps
Start Amps	15 A fixed	2-150 A
End Amps	15 A fixed	2-150 A
Up/Down Slope time	0-5 Seconds	0-25 Seconds
Pre Flow Time	0-5 Seconds	0-5 Seconds
Post Flow Time	0-5 Seconds	0-25 seconds
2t/4t	yes	yes
Hot Start arc amp (stick)	No	welding amps + 1-100%
Hot start arc time	No	.1-1.5 Seconds
Inverter Frequency	27khz	50 khz
Anti stick function	no	yes
memory	no	0-9
weight	16 kg	9.8 kg
dimensions	425x195x310 mm	same
Protection class	IP21s	IP21s