The tube is 1.5"x 0.120 wall thickness. It bent nicely around the mounting points after they cooled. Would the best way to straigten these out be to lay a bead on the opposite side then grind it off once it cools, or would a torch work better?
Member
Warped tube. Whats the best way to straighten?
The tube is 1.5"x 0.120 wall thickness. It bent nicely around the mounting points after they cooled. Would the best way to straigten these out be to lay a bead on the opposite side then grind it off once it cools, or would a torch work better?
Poewr I-Mig 205P
Powertig 185
Posting Permissions
Reply With Quote