Never mind Oleg just called and is taking my new welder away for another customer.
This turned from total elation to total bummer REAL FAST!
Thurmond
Never mind Oleg just called and is taking my new welder away for another customer.
This turned from total elation to total bummer REAL FAST!
Thurmond
Last edited by Tritium; 03-23-2013 at 01:01 AM. Reason: Never mind they shipped it to me by mistake.
Miller Bobcat 3 Phase,
Miller Suitcase X-Treme 12VS wire feeder for the Bobcat with M-25 300A .045" gun / Bernard 400A 5/64" wire mig gun .
26 series gas cooled TIG torch, setup for quick connect to Bobcat.
17 series gas cooled Tig Torch for Low Amp Solar Tig (Direct Solar Panel Powered Tig welding)
Hobart Handler 187 Mig / Fluxcore
EVERLAST PowerUltra 205P
EVERLAST PowerTig 250 EXT 2013 Model
Ok, Everything Is straightened out and I do get to keep the welder. I was supposed to get one of the new shipment in a couple of more weeks but the shipping department accidentally shipped me the LAST one off the shelf that was to go to another customer. Oleg straightened out the deal all around and I am VERY happy and even though the other customer is not happy he is getting some free stuff for his wait so it has to be said that Oleg is a fair and equitable vendor who goes the extra mile to correct and make right any mistakes that are made. I am sure the other customer will appreciate not getting this one as it became tear stained when I thought it would have to be returned . Besides that as many of you well know getting a welder shipped by UPS damage free is a roll of the dice at best . Shipping this one 3 times as would have been required would almost mean certain shipping damage.
Thurmond
Miller Bobcat 3 Phase,
Miller Suitcase X-Treme 12VS wire feeder for the Bobcat with M-25 300A .045" gun / Bernard 400A 5/64" wire mig gun .
26 series gas cooled TIG torch, setup for quick connect to Bobcat.
17 series gas cooled Tig Torch for Low Amp Solar Tig (Direct Solar Panel Powered Tig welding)
Hobart Handler 187 Mig / Fluxcore
EVERLAST PowerUltra 205P
EVERLAST PowerTig 250 EXT 2013 Model
Links to my welding projects > : Spray Arc with the 250p : Coldsaw Stand : Welding Cart : Heavy Duty Rolling Shelf : Taller Bandsaw
2013 250EX : SSC Pedal : I-MIG 250P 20' Profax gun : Power Plasma 60 p80 torch : 3M Speedglas 9100XX : Evolution Rage 3 DB cold saw
You know guys, it's funny, I have much better luck with FedEx than I do Brown.
If I go Brown, it usually looks like it was thrown to the ground! When mine got here
(a full 7 day trip BTW) I made the driver wait until I opened it before he left. Outer
carton looked rough but the inner one was fine. Brown is nowhere near what they use to be.
No Crack Too Tight, No Gap Too Wide. If You Don't Like The Way I Do It, I'll Let You Try It!
Penncrest Buzzbox - Infinite amp control! Man the 70's were good.
Everlast Powerplasma 60 - Reliable unit, cuts well.
Everlast i-MIG 250P w/spoolgun - Really smooth, plenty of cajones.
Everlast 250EXT - Sometimes it just takes a kick in the balls...
Everlast 255EXT - Just started playing
When I started with Everlast a long time ago, some paychecks I thought I would never see, things were tight at the margins.. But I trusted Oleg, he always delivered and made things right or better.. I have seen that for years with our customers as well.
It's many years later, products rock-and-roll. The company is a real name now. But we try to keep the prices down and make the feature and looks better. That, sometime, slows things now and people get impatient. We can ask a Miller price and get one to you in two days if you like? ;D
We are not always slow, but sometime we are not the fastest. But Oleg always delivers.
Thanks for being the best customers and trusting in Everlast. Sorry for any delays.
Mike R.
Email: admineverlast@everlastwelders.com
www.everlastgenerators.com
www.everlastwelders.com
877-755-9353 x203
M-F 12 - 7PM PST
FYI: PP50, PP80, IMIG-200, IMIG-250P, 210EXT and 255EXT.