210 ext macked out

[thegreatmrf]

Hi my name is Paul . I'm a fabricator in Canada and I bought this 210 ext off usednanaimo.com and was happy with it but not with the stuff it came with so I upgraded my tortch to a weldcraft cs310. My foot pedal is a lincoln reworked with a 1k long neck potentiometer and a pigtale, everlast to lincoln. I also made a cart and a 220v pigtale to connect the water cooler. Just need a new flowmeter and a better ground clamp.

[thegreatmrf]

More pics of 210ext.

[performance]

We haven't had any issues with the 210 torches or problems with the foot pedal. It's different than the other pedals. The correct ohm is 1500 on that unit I believe. Before you make any modifications such as that, you should clear it with Everlast Canada for warranty.

[Rambozo]

We haven't had any issues with the 210 torches or problems with the foot pedal. It's different than the other pedals. The correct ohm is 1500 on that unit I believe. Before you make any modifications such as that, you should clear it with Everlast Canada for warranty.

EXT 210 uses 1k.

http://www.everlastgenerators.com/fo...7502#post37502

Since he bought it used from a third party, isn't the warranty gone? Or is Everlast CA different? It doesn't sound like he had problems with the accessories, just a matter of personal preference.

It looks like you have it all setup and decked out to your liking. I like the cart matching blue wheels. Is that short pigtail just so you can get power for the cooler?

[Mr120]

Nice setup. You did a great job on the cart. Everything is nice and compact. Do you know what kind of work clamp you are going to get?

[thegreatmrf]

http://www.everlastgenerators.com/fo...7502#post37502

Since he bought it used from a third party, isn't the warranty gone? Or is Everlast CA different? It doesn't sound like he had problems with the accessories, just a matter of personal preference.

It looks like you have it all setup and decked out to your liking. I like the cart matching blue wheels. Is that short pigtail just so you can get power for the cooler?

Ya I found the foot pedal a piece of junk it stopped working so I took it apart ,had to finish a job couldnt get it right so I smashed it and made my lincoln work. It is a a much nicer pedal for everyday use. And regarding the 220v pigtail ya there is no receptical on the machine.

[thegreatmrf]

Ya I have my eye on a clamp that I normaly use on my other welders,it takes a strong hand to squeez , I found my everlast likes a solid tight ground.

[everlastsupport]

I still use the 210EXT (and the 250EX) with the stock torch. Going for a CK flex-loc soon. But the torch is a great air cooler torch other than the hose cover is a little stiff (rubber). Also, that's a new pedal for us and I have had no issues testing it, but I really do not use the pedal. It is lower than our previous pedal and has worked well for me when I used it.

I like the cart, green wheels would have put it over the top Great job. Post up some project with you have the time. I know it is hard when trying to get pay and get on the next one.