New Rod from Parker AZ

[Rodsmachineshop]

Got my New Everlast 250 EX Tig welder Friday going to set it up and see how It works . I own a full machine shop in Parker Arizona so welder will get used almost every day . Will get allot of use since my machine shop dose air cooled VW engines and most VW heads need cracks welded .

[rinktumbody]

Got my New Everlast 250 EX Tig welder Friday going to set it up and see how It works . I own a full machine shop in Parker Arizona so welder will get used almost every day . Will get allot of use since my machine shop dose air cooled VW engines and most VW heads need cracks welded .

Welcome Rodsmachinshop. I had two beetles and a camper (1963). The latter blew a head, had three sets of reduction gears and two engines. So I empathize with those folks you'll be helping. Oh yes, the last beetle developed a fuel leak at the carb and engulfed itself in flames. That was the last.

[everlastsupport]

Welcome Rod,

No VWs here, maybe in the next buggy. Tell if you need us.

[performance]

Same here....
If you have have any operational questions, I will be glad to help or Mike will I am sure...If you need deeper technical help as far as the electronics, Mike is 'da man.

[Rodsmachineshop]

I also do corvair engines oops shouldnt have said that lol

[performance]

I don't think they made near as many corvairs as they did bugs. So, I think you are safe.lol. Thanks to Nader.


But apparently he was concerned more about wheel bearings and axles than a fuel tank mounted in the fire wall......

[everlastsupport]

And the air cooled part did not help with the engine in the back.

[WAYNESWORLD]

My first 2 cars were Corvairs! Great cars. I remember someone also made a kit to put the pancake 6 Covair engine in to a Bug. They would really fly with that set up.
Wayne

[Rodsmachineshop]

I use to work with a guy that worked for ED ROTH doing his drivetrain and engine work on his custom cars. He had a corvair repair shop in the 70 we use to put v8 engines in them lol He had a cool 63 corvair with a 348 chevy engine in the rear of the car ran through a boat v drive unit back to the rear end it was cool , we did a 65 convertible with a 389 pontiac engine with try power that sat mid center in the car you sat in the back seat to drive it .

[everlastsupport]

Rod,

The 63 sounds like it would be a little light in the front end but easy to pull the wheels off the ground.