Foot Pedal Rubber Feet Mod

[watercooler]

This is a quick and easy mod adding anti slip rubber feet on the bottom of your welder foot pedal.I think the pictures explains everything and the rubber feet screws are self tapping so all you have to do is apply a little pressure when screwing them in with a Phillips driver.Its a night and day difference you will notice right away after the rubber feet are installed and no more worn down screws and foot pedal sliding all over the place.Total cost is $5.78 shipped.

Here is the link.
http://www.ebay.com/itm/DUNLOP-ECB-1...item3a7f6beb13

This is with the stock screws and as you can see the screw heads are half way rub down from sliding around on the floor while in use.

Rubber feet installed

Part number #ECB151 they are used in a wah wah foot pedal.

Comparison between stock screws and rubber feet.

The 4 rubber feet installed.

[Kempy]

Watercooler
Great idea, I just used a small rubber pad on the floor but now I don't have keep looking for it.

This is a quick and easy mod adding anti slip rubber feet on the bottom of your welder foot pedal.I think the pictures explain everything and the rubber feet screws are self tapping so all you have to do is apply a little pressure when screwing them in with a Phillips driver.

Here is the link.
http://www.ebay.com/itm/DUNLOP-ECB-1...item3a7f6beb13

[watercooler]

Thanks,just little things like these goes a long way.