I wanted to build a cart for my plasma cutter that would do a few things. #1. Have a small foot print. #2. Wouldn't cost my any additional money. That means the only materials I could use had to be already available in my shop. #3. It also had to hold my portable air compressor that I use to supply it with air.

So here is how it turned out. If I could do it again I'd have used 1" square on the bottom shelf. Other than that I'm really happy with how it turned out. It still needs to be painted and a few small things buttoned up on it but that will come later. The only major things I plan to add to it will be a custom air cooler/moisture trap that will mount to the back between the tubes. This will help get rid of the 100' of hose I use now.



For those interested in watching the videos that I shot during this build here is the link. Word of caution. I talk to much. If you don't like it and would like to see more work & less talk I'm willing to take donations to get a good camera and the upgrades I need on my computer to run video editing software properly lol. If you're not going to donate I don't want to hear it lol.

http://alvarezmetalworks.com