John Romania

[john_electro]

Im john from romania
are tig welder for over 13 years professional experience,I worked in my country but I worked and other countries ( Lithuania, Denmark-tig welding aluminum, Norway, Italy, Sweden, France and Belgium.I am very happy because yesterday July 20, 2013 after waiting almost 2 months I managed to get possession of the coveted PowerTig 250EX,What I can say is gorgeous, absolutely beautiful - I made only a small sample electrode ;works very well, but the lack of a full tube Argon I did a test TIG.When a tube and argon to have a back with details and pictures.Many thanks Everlast and remain indebted to Oleg who was very prompt in replies and in my opinion helped me the most;I apologize for the content of text and speech in English JOHN Romania !!!

[zoama]

Bine ați venit pe forum. Arătați fotografii cu munca dumneavoastră atunci când aveți timp.

[DaveO]

Welcome, John! Congratulations on your new machine! (By the way, your English in fine- much better than my Romanian!

In what industry do you weld? Sounds like you've done a lot of work in a lot of places!

[everlastsupport]

Welcome aboard John,

Your English is fine as Dave said. Please share more on you TIG work. You have been all over. You picked a great unit in the 250EX. Do you plan to use a water cooler with it?

[m j mauer]

Welcome to the forum.

[john_electro]

I work in the oil and gas refinery furnaces specifically,where welded ( I just tig weld )pipe that is made safer furnace coils cuptoarelor.ca steels and welding materials, low and high alloyed steels and stainless.

[john_electro]

on cooling unit I'm going to build personal ( this because I have the parts required and hobby electronics and construction that virtually tronics 6-7 years )....anyway to put pictures of the evolution of building cooling unit

[Mr120]

on cooling unit I'm going to build personal ( this because I have the parts required and hobby electronics and construction that virtually tronics 6-7 years )....anyway to put pictures of the evolution of building cooling unit

Congratulations on your new Everlast welder. It is a great looking welder that is for sure. I look forward to see more on your watercooler project.