Question about 2 pin connector on the Power Plasma

[I_Love_Plasma]

Does anyone have a part number for the DIN plug for torch switch on the Supercut 50? I searched all over the web, couldn't fin a 2 pin. Maybe I should look for a 7 pin DIN?

Any help much is appreciated.

Good talking to you on the phone Mike, Thanks for the help.

I Love Plasma

[performance]

Its a panasonic plug if that helps you look for one. What did you need it for?

[everlastsupport]

You can check mouser.com and digikey.com. They will have it.

"Some" Radio Shacks have them, I have also pulled the pins from a radio shack 7 and used them on a torch on the PP50 without the connector.

I will see if we have any at the main office.