new miller machine rollout / good for everlast

[fdcmiami]

http://www.millerwelds.com/products/...p?model=M00389

man, you'd have to be a cult member to pay these prices, don't forget the cooler;

[zoama]

Nothing to offer over a 250EX and you could buy three 250EX for the price of that thing.

[fdcmiami]

Nothing to offer over a 250EX and you could buy three 250EX for the price of that thing.

that's the base model. did you click the models and pricing link.

[geezer]

Nothing to offer over a 250EX and you could buy three 250EX for the price of that thing.

you could not only buy the 250EX's you would have enough left over to hire people to run them in your shop..lol

[Kempy]

I guess we will see how the new 255EXT compares to the Miller 280 at over twice the price they been working on it for almost 2 years trying to make it work right.

[DaveO]

In addition to sine wave and square wave, it has a triangular wave, which I'd never heard of. I'll have to read up on that- I thought the whole point of controlling the wave was to maximize the time at the extreme ends.

[Kempy]

In addition to sine wave and square wave, it has a triangular wave, which I'd never heard of. I'll have to read up on that- I thought the whole point of controlling the wave was to maximize the time at the extreme ends.

The PowerTig 255EXT has all the same wave forms to the Miller 280. also see Pics.




http://www.everlastgenerators.com/do...TIG-255ext.pdf

[performance]

Looks like the mythological Dynasty 280 is ALIVE!!bawahahaha. It lives!!

Noticed a few things. It happens to have a easy start up too. Not sure if it works identical to ours, but we have one. Looks like they get you a limited, but fairly useable set of features on the regular 280, but stick you for an extra 600 bucks to get the good stuff.

Looks like they have rolled out upgradeable software. Which appears to give expanded features/performance for a price. You pay to play so to speak. We have an internal interface in ours that allows us to do "approved" upgrades. It could be moved to a USB port I imagine at the rear of the machine, but then how many of you guys would want to go monkeying around with the software??? Yeah. You know who you are. lol. Given the popularity of the arduino thread, we have our likely suspects.lol.

[geezer]

http://www.millerwelds.com/products/...p?model=M00389

man, you'd have to be a cult member to pay these prices, don't forget the cooler;

Ouch!!!!!,,,man,, you aren,t kidding,,,had a bad case of sticker shock,, my knees got wobbly,,,when I opened that up,,,has to be a missprint,,,decimals are out of place,,,or,,something to that effect....

[Rambozo]

Must be the worldwide shortage of blue paint driving up the price. Can you actually buy one now, or is this just another page that will vanish into the smoke and mirrors like the last time they posted it?

[youngnstudly]

Must be the worldwide shortage of blue paint driving up the price.

I hear they use solid gold bars to produce that paint. Couple that to the fact oil prices are so high (paint being a petroleum product and all), and you instantly discover why this unit costs so much. The reason is that Miller is counting on their dedicated supporters to overlook the machine's pitfalls and price, and instead focus on it's "innovative features and technology." That logic hasn't failed them in the past, has it?

Ouch!!!!!,,,man,, you aren,t kidding,,,had a bad case of sticker shock

Good point! Though actual stickers aren't involved, stenciling the letters M-I-L-L-E-R over paint that is produced from solid gold and oil is a tricky process, and would be yet another reason for them asking such high prices for this (and all other) units. Again, it's the petroleum that is driving up the cost of their products. It's not Millers fault their machines are so expensive! Miller is your friend, a company who only wants the best for you, a company who is on your side...with both hands out.

Did you really believe they were in the business of using their loyal customers to profit heavily? Me too.

[5440]

Ya that thing is not cheap, but one is designed and assembled in the USA and one is "designed" and assembled in China. A bit of an apples oranges comparison wrt price.

[performance]

Ya that thing is not cheap, but one is designed and assembled in the USA and one is "designed" and assembled in China. A bit of an apples oranges comparison wrt price.

No, not really, don't think it's apples and oranges at all. What most people are interested in comparing is cost, features, warranty and performance. The others are secondary issues for a lot of people. The design for our unit started right here in the US. I don't think you have any idea of how much work we did here on our side... I wouldn't automatically assume all the design was totally done here in the US with Miller either. Remember they have a chinese factory, and engineers there, and elsewhere throughout the world. It could have been outsourced. And from the sound of it, this unit has had design/production issues from Miller, which is only "assembled" here, and that really only can mean that they are slapping the final major components in and screwing the cover on...with the bulk of it premade off shore.

[Paul Moir]

The design for our unit started right here in the US.

Ya know that's a strike against to some of us out here. (Not representitive of most of your customers I'm sure, and not necessarily a strike against compared to Chinese engineering...)

So for the uninitiated, what's the typical Miller difference between MSRP and what you actually pay? 30%?

[Kempy]

The Miller and Everlast Duty Cycle on the Miller 280DX and Everlast 255EXT also to get Miller with the Cart, Cooler, Torches, Regulator, Ground clamp, Stick holder and Foot pedal is around $8000.00 Everlast $3000.00 list price.

Miller 280 DX
1-Phase Duty Cycle
Stick (SMAW)-----------TIG (GTAW)
280 A, 10%------------280 A, 25%
180 A, 60%------------235 A, 60%
160 A, 100%----------200 A, 100%

Everlast 255EXT
1-Phase Duty Cycle
Stick (SMAW)-----------TIG (GTAW)
225 A, 60% 29V--------250 A, 60% 20 V
175 A, 100% 18V-------200 A, 100% 18 V

[Rambozo]

Duty cycle really falls off for those last few amps. Seems like they are really pushing the machine. I wonder what that will do for the longevity. I still wonder if the thing is really available. I sure don't see it online anywhere, and I'm waiting for a call back from my Miller dealer LWS. They had no way to order one through their standard channels.

I do like that the AC balance range is from 50% to 99% on the DX model. I never understood why some machines go down to like 20% EN on balance. I think in the best industrail designs, with both controls and gauges, the most common settings should be mid scale. It was that way on the Syncrowave where 50% was at #3, but then they changed that. You can always get super high amounts of EP if you want by swapping leads.

[MrBoiler]

It's pretty amazing what is being made in China nowadays. The quality isn't all that bad either. Honestly, the quality many times is better than what is made here. I'm still freaked it by how good my 200DX is. A friend of mine who runs a stainless steel welding business for the agricultural market was blown away at how sweet the machine operated. He has about 4 or 5 Miller Dynasty's that he loves But he's starting to rethink whether "Green" is the new " Blue" ...


Sent from my iPad using Tapatalk - now Free

[Zoomie]

I think I'd rather have my 225LX, cooler, Ck torch and 3K's worth of insurance. Yeah, I don't melt metal for a living but I just don't see it being worth that much more. Heck, you could store 2 spare machines in the toolroom and still be .5-1K ahead...