SuperCut 50

[1960plumber]

It will work fine then I stop cutting for 10 min. Then I get none thing it only blows air out what's up with it.

[1960plumber]

I found my Electrode lose could that make it not arc

[acourtjester]

some torches have a safty built in, if you have a brass ring on the torch cover that is what its for. If the tip is loose it will not fire. There are clearances inside the torch the need to be held, if not you will burn the consumables.

[1960plumber]

Now it does none thing no arc no none thing but air.Were do you take these machine for warranty work.

[zinger]

Now it does none thing no arc no none thing but air.Were do you take these machine for warranty work.

I had a resister blown on my board that caused the same problem. fixed the resister and the machine works fine.

[joshuab]

Now it does none thing no arc no none thing but air.Were do you take these machine for warranty work.

If you think you need warranty work, you should call in to Everlast's main number and ask for tech support. They will walk you through some troubleshooting steps that may get you sorted out, and if they can't sort it out, they'll issue you an RMA for a return. The warranty work is performed by shipping the machine back to Everlast. I don't think there are any local service centers or anything like that.

Note: I'm not an Everlast rep. Just trying to be helpful.

[1960plumber]

Thank you both for your answer I have called tech support and i'm waiting now for them to call me.

[1960plumber]

When you send something in for warranty work when will they e-mail you to tell you what's up.

[everlastsupport]

When you send something in for warranty work when will they e-mail you to tell you what's up.

It will be repaired and sent back. If you want to check the status, you can email status@everlastwelders.com or call the toll free number on the website (877.755.9353) and ask for ext 202 or 207.

[1960plumber]

It will be repaired and sent back. If you want to check the status, you can email status@everlastwelders.com or call the toll free number on the website (877.755.9353) and ask for ext 202 or 207.

Thank you !

[1960plumber]

WOW Just talk to them and they told me they couldn't fix it they would be shipping me a new one out wednesday. That was to easy Thanks everlast