PM 256 specs

[2rods]

Can anyone tell me the physical dimensions and weight of this unit? can't seem to find anything on site. Thanks.

[everlastsupport]

I is about 9W"x17H"x21.5D", the unit itself. If this is for a cart, add to that for hard torch connectors on the front and storage on the sides.

About 140lbs in the box with all the extras. That is from the UPS label, but they tend to add weight like cameras do.

I would guess the unit is about 80 lbs plus or minus alone. I will open one today and see if I can get better idea.

[2rods]

Thanks. Is the unit 17 or 21.5" high? Found a cart real cheap and just want to make sure it will fit the unit. Top shelf of cart is 18 x 11".

[everlastsupport]

Thanks. Is the unit 17 or 21.5" high? Found a cart real cheap and just want to make sure it will fit the unit. Top shelf of cart is 18 x 11".

It is 21.5" deep, but I did not measure the center of the feet will later and post.

[everlastsupport]

Looks like 16 inches for the feet on the button of the unit.

[performance]

We have well made carts fairly inexpensive for that unit. I would not use a cart that is too small for the welder as you will have stability issues....Warranty does not cover falling off the cart.