Share
Results 1 to 20 of 28

Thread: Brake Cleaner Phosgene Gas

Hybrid View

dwdw Brake Cleaner Phosgene Gas 03-31-2010, 11:22 PM
performance DWDW, I think we have... 04-01-2010, 03:02 AM
Rodsmachineshop brake cleaner sucks any way 04-01-2010, 04:55 AM
jtybt OOOOH Sheeeit!!! I use it... 04-01-2010, 06:48 AM
everlastsupport This was on the forum some... 04-01-2010, 10:38 AM
Mike J Great advice - thanks. I work... 12-11-2011, 05:28 AM
tnc110 I had no idea!!! I believe... 01-03-2012, 03:45 AM
ShaneJackson I too had no idea on this... 08-11-2012, 02:24 AM
Rambozo The best thing to take away... 08-11-2012, 03:03 AM
Brian Ski People don't know about the... 08-11-2012, 02:08 PM
everlastsupport Good point, it's bad, but not... 08-11-2012, 11:13 PM
Blake80486 I knew about galvanized (I've... 03-28-2013, 02:39 PM
aaxiss These kind of posts should be... 04-02-2013, 08:52 AM
Previous Post Previous Post   Next Post Next Post
  1. #1

    Default

    People don't know about the dangers of welding galvanized... That is pretty bad stuff too...
    Shade tree MIG welder.
    Now a Shade tree TIG welder.

  2. #2

    Default

    Quote Originally Posted by Brian Ski View Post
    People don't know about the dangers of welding galvanized... That is pretty bad stuff too...
    Good point, it's bad, but not near as bad as chlorinated products. That will kill you and fast.

    We do galvanized all the time. 5'x10' sheets of tacked expanded and sheet (11+ in the last month). It will make you a little light headed if you really breath a lot of it. It also does clear out of your system. Best thing is grind it off or vent it well over shielding gas. We vent it as we want to keep as much on the trailers as we can.

    Galvanized can be do if done right, done really wrong will make you sick. OP, not recommended at all.
    Mike R.
    Email: admineverlast@everlastwelders.com
    www.everlastgenerators.com
    www.everlastwelders.com
    877-755-9353 x203
    M-F 12 - 7PM PST
    FYI: PP50, PP80, IMIG-200, IMIG-250P, 210EXT and 255EXT.

  3. Default

    I knew about galvanized (I've got one of those canister masks for working with it) and though I don't use it, never thought there was a danger with brake cleaner (I mostly use alcohol and acetone).

Similar Threads

  1. Tig welding with magnets around and aluminum cleaner
    By Steve in forum TIG Welding (GTAW/GTAW-P)
    Replies: 8
    Last Post: 08-05-2013, 06:21 PM
  2. MIG wire cleaner
    By Schuh in forum MIG Welding (GMAW/GMAW-P/FCAW)
    Replies: 6
    Last Post: 06-11-2013, 04:40 AM
  3. MIG wire cleaner
    By Schuh in forum Technical Bulletins and Tips
    Replies: 1
    Last Post: 06-09-2013, 12:44 AM
  4. "Ultra Bright Aluminum Cleaner" acid-based aluminum cleaner review
    By jakeru in forum General Welding Questions
    Replies: 4
    Last Post: 06-29-2011, 07:02 PM
  5. Press brake
    By Ram48 in forum Other Custom Fabrications
    Replies: 34
    Last Post: 03-28-2011, 02:55 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •