Share
Results 1 to 2 of 2

Thread: Power Ultra 205 video testimonial.

  1. Default Power Ultra 205 video testimonial.

    Here is what I put together, since I was able to find very little info on these on the net. You can skip to my thoughts once the vid starts, there is a link in it. Long story short, I think that the value was good enough to overlook some fairly minor issues. There are a few things I would have liked to see, but if they increased the cost at all I would not have been able to afford the unit...


    Last edited by Any Cal.; 03-30-2014 at 08:03 PM.

  2. #2

    Default

    Very Good Review from the beginning to the end.
    EverLast 140ST
    PowerPlasma 50
    No You Can't Use Them

Similar Threads

  1. Power Ultra Ordered and on it's way with DHL
    By Zaichuk in forum Multi-Process Units (TIG,Stick,Plasma/MIG,TIG,Stick Combo units)
    Replies: 7
    Last Post: 04-07-2011, 02:41 AM
  2. Power Ultra 205 issue
    By turpehar in forum Multi-Process Units (TIG,Stick,Plasma/MIG,TIG,Stick Combo units)
    Replies: 3
    Last Post: 11-20-2009, 06:17 AM
  3. power ultra 205
    By gwk in forum Customer Testimonials
    Replies: 3
    Last Post: 09-27-2009, 11:58 PM
  4. Got my power ultra 205 in friday
    By Rob.hall in forum Customer Testimonials
    Replies: 2
    Last Post: 09-04-2009, 05:22 PM
  5. manual for power ultra 205
    By pmill607 in forum Multi-Process Units (TIG,Stick,Plasma/MIG,TIG,Stick Combo units)
    Replies: 3
    Last Post: 06-17-2009, 05:54 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •