Share
Results 1 to 2 of 2

Thread: Power Ultra 205 video testimonial.

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. Default Power Ultra 205 video testimonial.

    Here is what I put together, since I was able to find very little info on these on the net. You can skip to my thoughts once the vid starts, there is a link in it. Long story short, I think that the value was good enough to overlook some fairly minor issues. There are a few things I would have liked to see, but if they increased the cost at all I would not have been able to afford the unit...


    Last edited by Any Cal.; 03-30-2014 at 08:03 PM.

Similar Threads

  1. Power Ultra Ordered and on it's way with DHL
    By Zaichuk in forum Multi-Process Units (TIG,Stick,Plasma/MIG,TIG,Stick Combo units)
    Replies: 7
    Last Post: 04-07-2011, 02:41 AM
  2. Power Ultra 205 issue
    By turpehar in forum Multi-Process Units (TIG,Stick,Plasma/MIG,TIG,Stick Combo units)
    Replies: 3
    Last Post: 11-20-2009, 06:17 AM
  3. power ultra 205
    By gwk in forum Customer Testimonials
    Replies: 3
    Last Post: 09-27-2009, 11:58 PM
  4. Got my power ultra 205 in friday
    By Rob.hall in forum Customer Testimonials
    Replies: 2
    Last Post: 09-04-2009, 05:22 PM
  5. manual for power ultra 205
    By pmill607 in forum Multi-Process Units (TIG,Stick,Plasma/MIG,TIG,Stick Combo units)
    Replies: 3
    Last Post: 06-17-2009, 05:54 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •