New 325EXT gas fitting?

[kumaichi]

Just received my new PowerTIG 325EXT and wanted to get a 90 degree fitting for the back gas connection, which currently is interfering with my Argon bottle. Does anyone know what size fitting I would need and where I might get one?

Thanks in advance,

Craig

[Kempy]

Just received my new PowerTIG 325EXT and wanted to get a 90 degree fitting for the back gas connection, which currently is interfering with my Argon bottle. Does anyone know what size fitting I would need and where I might get one?

Thanks in advance,

Craig

I tried many times to do it and they are still to long I found it easier to just put a 1X1 square tube between the tank bracket and the cart that is on the Everlast one.
Good luck on finding something.

[kumaichi]

Thanks Kempy for the reply. Do you remember where you bought the parts for your 90 deg fitting? Seems odd that nobody makes anything like that though, I would think it's a common concern with the gas port coming out of the center of the machine like that.

[Kempy]

Kumaichi the fitting you want is a AW-407 page 14 made by Western Enterprises this just one of the company's that make fittings.
This is the book (http://westernenterprises.com/wp-con...tings-2012.pdf)
Other books on welding stuff (http://westernenterprises.com/catalogs/)
this is the page I made it into a jpg.

[kumaichi]

It looks like the AW-407 might do the trick, depending on how long that one leg is. Thanks Kempy for looking that up and sharing, guess it's time to start experimenting .