Stick Electrodes for use with PowerTig 200 DV?

[MBfrontier]

I am looking to purchase some stick electrodes to try stick welding mild steel with my Everlast PowerTIG 200 DV. I frequently read blogs about the ability or inability to run 6010 rods so I'm trying to avoid the mistake of purchasing welding rods I will be unable to use. Which type and diameter of electrodes should I buy that will run on my machine? Any input is appreciated.

[everlastsupport]

I would start with 6011 or 6013 and some 7018. Start to practice with the 7018, it will help you learn the feel. But later, use the 6011 or 6013.

[performance]

7014 will do fine. No need to waste money on 7018 for GP work. 7014 is medium penetrating and is known as a "Fab" rod in the industry. Relatively high speed deposition rates, and a nice bead. 6011 should work if it's a decent quality rod in place of the 6010. Use Lincoln Fleetweld 180.

I have not had a chance to extensively work with the new DV. I have reason to believe it may actually work better with 6010, but we can't put that stamp on it until I actually test it.

[zoama]

Your machine will run 1/8" electrodes or smaller on 240v input.

[DaveO]

If it's useful information, all the electrode types mentioned will run electrode positive.

[Gerry]

For a good cheap rod look at the Hot Max Brand on Amazon part number 23046 1/8" 7014. 10lb for less then 20 bucks and free shipping if your a prime member.
I like the 7014 and their 7018.

[everlastsupport]

If it's useful information, all the electrode types mentioned will run electrode positive.

Good point. Some reading material for the OP http://www.weldersuniverse.com/fille...sumeables.html