My tig pedal stopped working is there a warranty on this part from everlast?

[fullydrooped]

So I was welding the other day and all of a sudden my pedal no longer triggered the welder u plugged and unplugged connections, still I had no luck. I decided to plug in the torch trigger and the welder ramped up so I'm sure the issue is in the pedal somewhere. My welder is two years old almost since I got it new. Is this an item that will be covered?

[zoama]

I believe accessories have a six month warranty from the date of purchase.

[performance]

That is correct. All accessories have a 6 month warranty.

[fullydrooped]

What would be a good pedal to get that isn't to expensive I have a power pro 256

[Rambozo]

What would be a good pedal to get that isn't to expensive I have a power pro 256

The replacement Everlast model is the low price option, the SSC is the better quality option, but the pedal is a pretty simple device, I'm sure you can fix yours for peanuts. It might be a simple mechanical problem, or if it is electrical, it sounds like either the switch part has gone bad, or perhaps a broken wire. A quick check with an ohm meter and you can sort it out in no time. You might as well take it apart and have a look before deciding.