flow rates

[Doug Wright]

need opinions on flow rates as LPM vs CFH .Are all Everlast regs calibrated LPM?
I am Welding .250 wall 2x2 square steel tubing.

[performance]

Yes all our regulators are currently in lpm. Multiply by 2.1 to get cfh.

Doug it depends upon whether its mig or tig and the conditions...but for tig about 7 lpm or 15 cfh and for Mig 10-12 lpm or 20-25 cfh.

[everlastsupport]

Check here for a quick conversion list

http://www.everlastgenerators.com/fo...read.php?t=261

Make sure you have no air movement as well (fans in the shop, welding outside).