Quote Originally Posted by everlastsupport View Post
The MTS250S is a nice $ machine. We have a IMIG200. 205P and 250P. The 200 is the light "go to" machine and it will handle aluminum and run on a 5500 watt generator. Has for many years. The 250P is the roll around stay in the shop machine. It can handle a lot of work. If I did it over I would get a 200 and 250 (no pulse; pulse sometimes requires a little test runs). I have \never used the MTS250P so I can not compare. I like the feature list and all weld modes.
You confuse me. You say the MTS250S is a nice machine but then state that you have never used "the MTS250P".

I'm really interested in the 250P to use in my boat building business but try as I might, can't get ANY user feedback. You say that you wouldn't get the pulse again; would you be so kind as to say why? You state that pulse requires little test runs. That does not surprise me, is that the only reason you don't like it?