Does the board have a JTAG for programming, or do you need to pull the chip to use an external programmer? Also what micro is used?
Senior Member
Does the board have a JTAG for programming, or do you need to pull the chip to use an external programmer? Also what micro is used?
Long arc, short arc, heliarc and in-the-dark!
New Member
Rambozo, here is a shot of the old one. I took it to make sure I got everything plugged back in
Senior Member
Well it sure looks like there is some type of programming port right next to the processor. Can't make out any chip numbers from that pic, though.Originally Posted by WhitsonMetal
Rambozo, here is a shot of the old one. I took it to make sure I got everything plugged back in
My curiosity is piqued by the unpopulated sections, where two transformers go. Is this the 240/480 model or the 240 only model? Overall it looks like a nice board layout.
Long arc, short arc, heliarc and in-the-dark!
New Member
Mine is run on single phase 240. If you'll pm me an email address I'll send you the full sized picture.
Senior Member
Both models will run on single phase 240. If you look on the back it should say if the second option is 240 3 phase or 480 3 phase.
Long arc, short arc, heliarc and in-the-dark!
Posting Permissions
Reply With Quote