New consumables

[performance]

Parker. I believe its a 1/8 euro connector that they sell.
You should be able to order it from them. I don't have the part number but I think it should come up.

[Slick]

Parker. I believe its a 1/8 euro connector that they sell.
You should be able to order it from them. I don't have the part number but I think it should come up.

The closest thing I see is a "high flow" but MacMaster Carr only goes down to 1/4".

I'm thinking some ball valves, and a 90* turn on the machines barb fitting in the rear will be best.

The cart I am thinking about building will be based off a old 2 wheel hand truck for a torch set up. The machine(and cooler in the future) will mount on the back, but sideways. This will allow for the machine to have the rear, and sides open, and not blocked by the argon tank.

Thank you for your help.