NEW STAND-OFFs S45 and P80

[Titan winch]

For Customers who prefer to use a Roller Standoff for the S45 over the wire stand-off we have these for both the S45 and P80 Plasma torches.

[ralphhood3]

Do you have anything similar for the AG60 Pilot Arc Torch that comes with the power ultra 205?

Thanks
Ralph

[everlastsupport]

Duncan is the best one to answer this.

But, based on my calipers, it will fit the S45 and the 60P.

[Titan winch]

The Roller Guides will not fit the existing S45 cups . In order to make it work you need to lightly sand the cup to make it fit.
The Standoff is designed for the new cups and as such they fit with the correct clearance.
At this time we do not have a roller guide for the Ag ( pink cups ) as these where not originally designated for Pilot arc start.
As you can see in the picture there is no way to adapt it . The cup is just the wrong shape to even try to rig it up.
Cheers

[ralphhood3]

Appreciate the picture, that's very helpful to see why it won't fit. Now I just need to find a roller guide that will fit the AG60 torch :-)

Thanks
Ralph

[performance]

Ralph,

Roller guides like this are fairly easy to make. I think (I think I did anyway) post a pdf to a simple breakdown of the parts needed to make one that is very close to what we have that uses locking collars. I am sure there is a locking collar that can fit the dimensions of the 60 amps torch.

[ralphhood3]

Ralph,

Roller guides like this are fairly easy to make. I think (I think I did anyway) post a pdf to a simple breakdown of the parts needed to make one that is very close to what we have that uses locking collars. I am sure there is a locking collar that can fit the dimensions of the 60 amps torch.

Any idea where that PDF was posted? Would love to see the breakdown of what it takes to make one. I get the idea from the explanation, but a short how-to PDF would be great for a newbie like me.

Thanks
Ralph

[performance]

I tried to reload it after adding a little more info, but it exceeds the file limit for pdf. I will try to see what I can do about getting Mike to increase it.

[Slick]

For Customers who prefer to use a Roller Standoff for the S45 over the wire stand-off we have these for both the S45 and P80 Plasma torches.

Are these standard or a option? What model torch comes with the PP256?

[zoama]

What model torch comes with the PP256?

WSD-60P with a 15' lead.

[redbeard]

I tried to reload it after adding a little more info, but it exceeds the file limit for pdf. I will try to see what I can do about getting Mike to increase it.

Did the file ever get re-upped and if so, where is it?

[zoama]

It could always be uploaded as a series of screen shots.