O Ring for I-MIG gun

[Gtig]

I was going to us my MIG for a patch weld but I noticed the little O ring that's on the end connector is missing. Any where I can pick up a few.

Thanks!
GTig

[zoama]

I was going to us my MIG for a patch weld but I noticed the little O ring that's on the end connector is missing. Any where I can pick up a few.

Thanks!
GTig

http://www.harborfreight.com/catalog...result?q=oring

[everlastsupport]

Probably any auto parts store or ACE hardware if you have them in Maine. Maybe take the torch with you just in case.

[Gtig]

Probably any auto parts store or ACE hardware if you have them in Maine. Maybe take the torch with you just in case.

I've tried ACE but the smallest was 1/16th and that was still too thick. I was able to find a 2mm metric, it was tight but I was able to fit it in.

GTig