Torch questions

[DJLVA]

I'm about to buy a powertig 255ext, I currently own a miller sychrowave and several torches, the favorite being a ck-20 series flex head water cooled torch. I know the everlast system uses a different dinse than miller, but can I swap torch heads?, I really hate to buy more torches to fit my fabrication shop needs
Thanks

[zoama]

Just swap the dinse, it's simple.

[DJLVA]

Awesome, thanks wasn't sure of the line compatibility
I usually buy torches and parts from arc-zone, would I just ask for a 35 series dinse (water cooled)?

[zoama]

Awesome, thanks wasn't sure of the line compatibility
I usually buy torches and parts from arc-zone, would I just ask for a 35 series dinse (water cooled)?

I used to deal with arc-zone but I found him to be quite dishonest. Everlast sells CK and knows what their machines require. I'd give Mark (Performance) a call at 877-755-9353 x204. He should be able to get you going. Post pics and let us know how it goes.

[DJLVA]

Ok, thanks, I didn't know everlast sold the pieces-parts. I'm calling
Monday to order a powertig 255ext and want to have everything I need to get going. Glad to hear I can do one-stop shopping. Was hopeing it was possible to swap out the dinse that comes with the machine for my torch and setup. Fits me like a glove and does what I need, but don't mind getting additional parts for the sake of simplicity
Thanks again
David

[christian]

Yeah,

If I'm not mistaken, you don't need to buy anything extra. You can just put your flex-head CK 20 torch on the same hose/cable/Dinse for a 20 Series assembly that comes with the 255EXT:

Standard Equipment:
12.5 ft Everlast 20 Series TIG torch with 35 DINSE style connectors and torch switch for 2T/4T operation
12.5 ft Everlast 9 Series TIG torch with 35 DINSE style connectors and torch switch for 2T/4T operation

I'm about to buy a powertig 255ext, I currently own a miller sychrowave and several torches, the favorite being a ck-20 series flex head water cooled torch. I know the everlast system uses a different dinse than miller, but can I swap torch heads?, I really hate to buy more torches to fit my fabrication shop needs
Thanks

[DJLVA]

Christian, thanks that's what I was hoping for, seems easy enough

Thanks for the reply
David

Yeah,

If I'm not mistaken, you don't need to buy anything extra. You can just put your flex-head CK 20 torch on the same hose/cable/Dinse for a 20 Series assembly that comes with the 255EXT:

Standard Equipment:
12.5 ft Everlast 20 Series TIG torch with 35 DINSE style connectors and torch switch for 2T/4T operation
12.5 ft Everlast 9 Series TIG torch with 35 DINSE style connectors and torch switch for 2T/4T operation

[zoama]

I believe the torch head connectors are different on the oem torch. Mark will know.

[performance]

Actually, I wish I did 100%. The issue is that we have been transforming some of our torches and I don't have daily contact with them to be able to speak intelligently about it. You could talk with Andrew at ext 206.

[DJLVA]

Mark, I bought the 255ext from you yesterday, you answered all of my questions and explained everything very well. I'll wait until it gets here, I think I have enough to get me started.
Thanks again, and appreciate your offer for help with the setup and use.
David

Actually, I wish I did 100%. The issue is that we have been transforming some of our torches and I don't have daily contact with them to be able to speak intelligently about it. You could talk with Andrew at ext 206.