MIG problem on MTS 275 Lightning

[gorillamotor]

I just was trying to use my MIG for the first time. When I press the wire feed button on the MIG handle it feeds about 1/2 second then stops. I tried a different MIG connector but the problem continues. I unspooled all the wire from the MIG gun and when I press the button same thing. Any suggestions???

[gorillamotor]

Disregard. I just noticed that the spot/stitch setting was 'ON'. I turned it off and it's OK now. The default setting should be 'OFF'.

[performance]

yes. we get that call.