WP9 Torch With ITIG200

**Titan winch** · 08-03-2010, 09:32 PM

Started playing around with the sample torches today. I like the small WP9 air cooled Torch . The WP20 is a similar size but has water cooling for a heavier amp load/ Duty Cycle.
Both torches are Flex necks which perhaps may not appeal to a lot of people but i like the versatility.
I included switches on all samples and have them run inside the sheathing .
I am not sure if it may not be better to have the contact wires run outside for ease of removal for people that will mostly use these torches in conjunction with a Foot Control.
Cheers

**cmd** · 08-04-2010, 03:53 AM

so before I go buy some other brand torch, when and how much for a 20 size with a flex head, like your photo but a 20

**Titan winch** · 08-04-2010, 04:21 AM

We need 3-4 weeks to evaluate the torches . The quality is good from a visual inspection but i think it is best to work them and see if there is some improvements to be made. Cosmetically the cover needs to be improved at the handle fitting .
this is perhaps a minor point but we will need to address this before the order goes in and of course if some issues develop with not so gentle handling then we need to be aware of it.
Realistically i think it is likely close to 10 weeks before they will be in stock with all consumables to match.
As for pricing on them we will be very competitive with 12' - 24' lengths offered.

**madcratebuilder** · 08-04-2010, 05:38 PM

Specking of torch size being a total noob to TIG are all the 17,18,26 size TIG torches the same size. I do know they use the same size consumables.

I have a 18 water cooled torch, is the 17 smaller? The 17 is air cooled, I would think it would be larger maybe? Are the 9 and 20 series torches larger than the 17, 18 and 26?