How is one supposed to take this off of the cup?
I wrestled with it for a bit, and got it off, but now it doesn't fit so well on the new cup I received today.
New Member
60A Cutter torch stand off
How is one supposed to take this off of the cup?
I wrestled with it for a bit, and got it off, but now it doesn't fit so well on the new cup I received today.
Moderator
I do not understand your problem with the standoff. The only type i know of for that size torch is the type shown in the Picture and this is a simple matter of tightening the two set screws .
Do you have something different??
New Member
Mine doesnt have wheels its just a formed wire piece that clips onto the cup.
This is like what I have.
Last edited by Slick; 08-19-2010 at 10:39 PM.
Moderator
What torch do you have with your 256 . I am not sure if it is perhaps different to what i carry. It is possible that you have a AG60 Torch
cheers
Last edited by Titan winch; 08-19-2010 at 10:53 PM.
New Member
Not sure, the handle looks like yours, but the head may be a bit different as its blocked by your stand off!Originally Posted by Titan winch
the cup is pink, with a groove for the above stand off to clip into.
Moderator
OK i know the torch you have it is the AG60 and the wire stand-offs for both the S45 and AG60 are very similar so it may be a possibility
that youhave a incorrect stand-off
Posting Permissions
Reply With Quote