Does any one have a ACDC 200 pulsed?
What do you set the argon flowmeter to for mild steel 120 amps?
Is there a rule of thumb for this?
New Member
ACDC 200 tig Argon Questions
Does any one have a ACDC 200 pulsed?
What do you set the argon flowmeter to for mild steel 120 amps?
Is there a rule of thumb for this?
New Member
Re: ACDC 200 tig Argon Questions
Been looking around most people seem to set them around 15 - 20 cf/h (cubic feet per hour) which you roughly cut in half to turrn into 7.5 to 10 L/h (liters per hour). This is what is marked on the flow regulator that came with my 200 ACDC tig. I went down even to 6 L/h it seems to be ok.
New Member
10-20 cfh i would run it at 12-14
Lincoln precision tig 275
Miller Syncrowave 350 Tig
Miller 250 Mig
old miller 200 Mig
HF 151 Mig
HF 100 FC
Victor Journeyman Oxy/Ace set up
Bunch of tools of the trade to much to list
Posting Permissions
Reply With Quote