Foot Pedal Upgrade

[everlastsupport]

Bill,

The pedal is the same for the LX and EX. Can you call tech support and get Mark or I and we can answer any questions you might have. We do have a new low profile foot pedal.

[jakeru]

Those unfortunately are the wrong connectors, they are too small, I ordered 6 and they will not work. I’m looking for a source for the correct connectors.

D'oh! That's a surprise! It sure looks exactly like the connector on my 3 year old Everlast Super200P... but then again I haven't actually bought one to test fit like you did.

Question for everlast: Did everlast use the same 7 pin footpedal connector across all their machines, past and present?

[everlastsupport]

The newer machines have a larger 7 pin connector. The pins are larger too.

[jakeru]

The newer machines have a larger 7 pin connector. The pins are larger too.

Thanks for shedding light on this, Mike! I'll bet that connector I posted the link to is still probably the correct part for my "oldschool" Everlast machine then.

Edit: Ray, want to sell me your connectors? (I probably have more use for them than you do. :lol: )

[dirtyfarmer]

Bill,

The pedal is the same for the LX and EX. Can you call tech support and get Mark or I and we can answer any questions you might have. We do have a new low profile foot pedal.

Mike R., Could you show what the new low profile pedal looks like? Also would it work with my PP256 I acquired July 2010?

[performance]

We are still working on getting them here. In the meantime the older ones have be upgraded a little for better operation.

[Rugar]

Thanks for shedding light on this, Mike! I'll bet that connector I posted the link to is still probably the correct part for my "oldschool" Everlast machine then.

Edit: Ray, want to sell me your connectors? (I probably have more use for them than you do. :lol: )

If not, I will send you mine when they get here after verifying they wont fit my 250ex.

[Ray]

I got the connectors from that exact post 2 for 3, if you would like them i'll send them to you for the cost of the postage.
Just PM me.

Ray

P.S. I have a guy at Greybar trying to find the correct ones now. (I gave him a sample, but there are no part numbers on the original connectors) I'll share part numbers for the replacements if he is successful.

[everlastsupport]

Jake,

I was cleaning up today and found a smaller pin size 7 pin connector (Super series). PM me an address and I will send it to you if you need it.

[geezer]

For those of you that need information on connectors, like how to determine the size and type etc, check out this website

http://www.weipuconnector.com/newpro8.htm

The WS16 size in particular.

The way to size your connector is to measure the outside ring that screws on, and subtract about 5 -6mm for example a WS 16 will measure about 21-22 on the ring and so forth.

[Rugar]

I got the connectors from that exact post 2 for 3, if you would like them i'll send them to you for the cost of the postage.
Just PM me.

Ray

P.S. I have a guy at Greybar trying to find the correct ones now. (I gave him a sample, but there are no part numbers on the original connectors) I'll share part numbers for the replacements if he is successful.

Any luck on this yet Ray?
Also, are the new Everlast low profile pedals coming in with the new welder shipment, from which I understand should be in soon? Any idea what the price will be?

[rengaw21001]

Which base model for the pedal on their web site would it be? Didn't find a search box to put the model number Steve provided in...
Thanks!

[sschefer]

Which base model for the pedal on their web site would it be? Didn't find a search box to put the model number Steve provided in...
Thanks!

You won't find a model number on their site, just follow the ordering instructions that I posted.

[Velocity]

Mark or Mike, any luck on pictures of the new low profile pedal yet?

[zoama]

Mark or Mike, any luck on pictures of the new low profile pedal yet?

Here ya go...

[performance]

We've had the new low profile for some time now, at least since March.
Zoama, the one above, is from SCC controls, not us.

[zoama]

We've had the new low profile for some time now, at least since March.
Zoama, the one above, is from SCC controls, not us.

I took the picture from everlast's ebay ad for everlast welders... http://cgi.ebay.com/New-Foot-Control...item3369c0fb37

[Velocity]

Mark if that's not it, then can you post a picture of the new model? thanks.

[performance]

I'll have to find the post, but Duncan has posted it here on the site already. You can either search through them or I'll try to find the post a little later, when I get caught up.

[zoama]

We've had the new low profile for some time now, at least since March.
Zoama, the one above, is from SCC controls, not us.

Is it not for sale ? The only low profile pedal that I find for sale by Everlast is the one I linked to at their ebay store. Why keep this new product secret ?