See user Total Distorsions pictures at pirate4x4

[admin]

If you are looking for a welder or plasma cutter and think our tech support forum is a little lean in information.

A new customer just left posts on another forum.

http://www.pirate4x4.com/forum/showthre ... ost9920262

Another site to view is weldingweb.com http://weldingweb.com/forumdisplay.php?f=55

[everlastsupport]

To whomever is interested in buying an Everlast machine...

I was always a bit skeptical of overseas welding equipment. Mostly just because the reputation that comes with it. I've been in the market for a while and after countless days and weeks searching online, I couldn't find a good deal on anything used. I started looking into the overseas scene, and started doing my homework. Out of the cheaper machines out there, I decided Everlast was the way to go.
I chose them because I noticed they have been doing there homework as well. To me they have better plasma, and tig torches, which is a big deal and consumables are easy to get. Also the processors are better. Anyway you can read about that stuff on their website. I'm trying to toot anyone's horn.
I'm here to show you my real world experience. I opted for the power master 205. It's a 3 in 1 machine. Working out of the garage, this thing will save a bunch of space.
Here is some pix when I got it...
[IMG][/IMG]
[IMG][/IMG]
Some with the cover off. Not like I know what any of that does!
[IMG][/IMG]
[IMG][/IMG]
Here's a shot of the plasma and tig torches. I left out the ''stick weld'' holder, cause I figured no one wants to see that.
[IMG][/IMG]
[IMG][/IMG]
Ok. So try not to ride me too much. I haven't tig welded in a couple of years, I've been hella sick for the past 2 weeks and I still need to dial in the settings, plus I just need to practice. Now I can!
1/8'' mild steel
[IMG][/IMG]
1/8'' wall tube hrew
[IMG][/IMG]
1/16'' aluminum
[IMG][/IMG]
3/16'' aluminum
[IMG][/IMG]