Cut50d

[everlastsupport]

Thanks Mike and the cutter has been working great! I will be cutting some 3/16" thick crusher corners for my TJ later next week so I will try and post a few before/after pictures.

Good to hear Ken.

Another Jeep guy. My son has a friend that has two monster Jeeps. They go out every weekend, in fact he's not here now. They also race them and do very well, but they break them as well. They race on a short mud drag strip, and those things fly. Just 2-3 seconds and the race is over (parts are broke, etc).

What do you with yours? Off-road, crawling, is it a new project.

Like to see the before and after myself. On the L135, you will need a bigger welder soon.

[kenwhite]

I primarily do rock crawling or anything technical. My entire suspension will be removed and replaced with new links and brackets. Oh, and I know my baby MIG will be pushed to the limits, I should have purchased a 240 VAC unit...

[kenwhite]

Just wanted to bump this up and state that the Cut50D is still working flawlessly after the initial issue...