Share
Results 1 to 14 of 14

Thread: Questions about the TIG Pulse Option on the Power Ultra 250p

Hybrid View

Haku Questions about the TIG Pulse... 02-13-2011, 12:09 AM
performance There are no settings. The... 02-13-2011, 04:29 AM
Haku I don't think you got what I... 02-13-2011, 04:49 AM
Haku No answer on this one or are... 02-15-2011, 01:14 AM
Ray Are there any knobs to adjust... 02-15-2011, 06:26 PM
Haku No knobs, just a rocker... 02-15-2011, 07:24 PM
Zoomie Haku, I assume you have the... 02-15-2011, 09:26 PM
Haku This is a new update for the... 02-15-2011, 10:16 PM
Ray Yes, your right, they are... 02-16-2011, 02:32 AM
Haku I actually called Oleg last... 02-16-2011, 03:23 AM
performance When I have more information... 02-16-2011, 04:11 AM
performance Im waiting myself to hear. 06-08-2011, 02:29 AM
Tritium I have ask the same question... 06-08-2011, 04:44 PM
performance Thurmond. I have sent an... 06-08-2011, 04:54 PM
Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jan 2010
    Location
    Chugiak , Alaska
    Posts
    259

    Default

    Yes, your right, they are not for sale yet, I couldn’t figure where that came from, but I heard you got it at the show in Atlanta.
    So honestly I have no idea, but will find out for you, please be patient, we’ll get the answer. I haven’t seen a manual yet.
    So what do you think of the unit?
    ____
    Ray

    Everlast Sales and Support Team.
    support@everlastalaska.com
    www.everlastalaska.com

    877-755-9353 X207

  2. #2
    Join Date
    Feb 2011
    Location
    Denver (Highlands aka NW Denver), CO
    Posts
    7

    Default

    Quote Originally Posted by Ray View Post
    Yes, your right, they are not for sale yet, I couldn’t figure where that came from, but I heard you got it at the show in Atlanta.
    So honestly I have no idea, but will find out for you, please be patient, we’ll get the answer. I haven’t seen a manual yet.
    So what do you think of the unit?
    I actually called Oleg last week wanting a Ultra 205, but they were out of stock and nothing coming in for at least a month. He said the only one they had for a similar price was this pre-production demo unit. I'm actually in Colorado, so there must have been more then one unit that sold.

    I haven't turned it on yet since I am still in the process of wiring my garage for 220v power, but the unit looks nice and the stuff that came with it seems nice and stout. I'll throw a review up once I start using it. I'm a complete TIG newbie (haven't run a bead at all with a TIG), but I've been wanting to learn for a long time. It will be nice to have something more precise then my Millermatic 211, so it was an easy sell to get one of the Multi Process units over just a Plasma cutter.

    Thanks for the info when it comes. I just like to know what I'm working with, and the pulse feature on this was what sold it to me over similar brands to Everlast. Looks like its a nice feature to have after seeing some of the "welding tips and tricks" videos.

  3. #3

    Default

    When I have more information on the new model, I will post it up. But I am betting it is probably .5 hz and 20 hz roughly. The pulse Hz is preset with 2 fixed and non adjustable settings. It is a tool, if it works for you. It should not be construed to believe that it will necessarily improve weld quality or help you in all situations. Yes, this appears to be the show unit, and at the time was set possibly to different parameters than the ones about to go into production. I have sent inquiries in about that unit to confirm, but with the holidays and things trying to return to normal over there, communication is a little slow on non critical communicae.

    BUT, just as Lincoln and others have a "fixed" ambiguous pulse setting on their tig units, the pulse is there if you want to use it, and any "parameters" are a moot point, since it will either work for you or not.
    Last edited by performance; 02-16-2011 at 04:15 AM.

  4. #4

    Default

    Im waiting myself to hear.

  5. #5
    Join Date
    Mar 2011
    Location
    The Boonies of Texas
    Posts
    420

    Default

    I have ask the same question about the PU 205P. I am guessing the answer for one will be the same for the other. I ask this question on May 20th in this thread

    http://www.everlastgenerators.com/fo...ower-Ultra-205 also in post #17 of that thread I posted my findings / guesses. I also inquired of Oleg via PM

    On June 2nd and he said he would ask Mark to contact me with the information.

    Thurmond
    Miller Bobcat 3 Phase,
    Miller Suitcase X-Treme 12VS wire feeder for the Bobcat with M-25 300A .045" gun / Bernard 400A 5/64" wire mig gun .
    26 series gas cooled TIG torch, setup for quick connect to Bobcat.
    17 series gas cooled Tig Torch for Low Amp Solar Tig (Direct Solar Panel Powered Tig welding)
    Hobart Handler 187 Mig / Fluxcore
    EVERLAST PowerUltra 205P
    EVERLAST PowerTig 250 EXT 2013 Model

  6. #6

    Default

    Thurmond. I have sent an email to the factory even before the question was asked. But have not received a reply. I was out of the loop on development of this feature on the machine. If anyone has it, it would be Duncan or Oleg themselves. I have asked about it, but not gotten an answer about it.

Similar Threads

  1. Power Ultra 250P Tig problem
    By kencal51 in forum Multi-Process Units (TIG,Stick,Plasma/MIG,TIG,Stick Combo units)
    Replies: 3
    Last Post: 11-13-2015, 10:15 PM
  2. Power I-MIG 250p
    By Yofish in forum MIG Welding (GMAW/GMAW-P/FCAW)
    Replies: 0
    Last Post: 02-25-2015, 05:25 AM
  3. Power Ultra 250P in unit welder fan is dismantling itself
    By Orlando in forum Multi-Process Units (TIG,Stick,Plasma/MIG,TIG,Stick Combo units)
    Replies: 2
    Last Post: 09-12-2014, 09:42 PM
  4. Power I-IMIG 250P questions
    By Diabolical in forum MIG Welding (GMAW/GMAW-P/FCAW)
    Replies: 11
    Last Post: 02-13-2012, 10:05 PM
  5. PT200DX Pulse questions
    By dseute in forum TIG Welding (GTAW/GTAW-P)
    Replies: 4
    Last Post: 01-02-2011, 07:15 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •