New contest: Everlast greenbucks

[Canada]

Hello Everlast

Not sure were this "introduction area" is. Basically I am finding your contest rules lacking clarity.
1) registered check
2) Please enter me into this contest, post 1
3) Not sure what or why this is important. I found a section in my profile and inputted something....I guess that is what was requested.
4) I won't be spamming but don't expect high end work. My post will have to be short and quick to make 60 in 15 day or so.
Question do we indicate the post number on each post? Or was ounce enough to get this started?

[Aktlr]

Hi-
This is my 1st post, count = 0, I'm a new welder, working with MIG in AL. Very interested in the Multi-process machine.
Tried to take care of the avatar and signature but so far I'm not getting it. Please enter me in this thread for Everlast Greenbucks.

[jsclark4500]

Hi, everyone... Jeff Clark here. Posting for the first time. Trying to figure how to enter this contest correctly. So, yes enter me in the contest. So what is the topic for the day?

[wruehl]

1. Register your name on our site forum. Done!
2. Post in this thread. Done!
3. Fill out your signature line, and AVATAR. Done!
4. By the closing date and time of the contest, the entrant must have accumulated at least 60posts. Working on it!

Hello, My name is Bill and this is my first post (So 59 to go!). Been making smoke out of various materials my whole life (sometimes on purpose)

Wow, finally hit 60. I think I'll have a beer...

[bigjoeinkg]

1. Completed.
2. Current Post Total 1.
3. Done.
4. Working on it.

[everlastjj]

Enter me in the contest guys! 60 post requirement pending.....

Thanks....look forward of course!

[ScratchStart]

I'm with wruehl.... beer me!

lookin forward to some new equipment!

[yotarover]

I'm with wruehl.... beer me!

lookin forward to some new equipment!

Aren't we all

[WikingWelder]

I'd like to be in the contest too
1. yep
2. got it, this is my first posting
3. got that too
4. Huhh, that'll take about 4 posts a day. I'm afraid that'll make a lot of people fill up the threads with a lot of BS just to meet that quota.
Cheers for now

[Burn-Thru]

New Member
This is post #1
Please enter me into the contest
I'm not very computer savy, so I'm quite sure I screwed something up in setting up my profile.
Waiting for my Powertig 200DX to arrive, it shipped this week.
Rewired my garage for 240V last week.
Today I picked up 80CF argon, gloves, 10# .060" alluminum, 10# .060" mild steel and some .060" ceriated tungsten
Obviously, I can't wait for the Tig unit to arrive.
59 more posts to go!

[joejoe]

New Member

Wanting to enter your contest for the greenbucks, I do not own any everlast equipment yet. I need to buy a plasma cutting machine, I have been looking at your machines. I was wondering if you have a machine that can be used for mechanized cutting. I mean both manual and mechanized, would like that option. Have been welding for some time I do mig tig and arc welding, Stainless steel, aluminum, and CRS. It would be nice to try out a new piece of equipment and a new brand, your brand looks impressive, just wondering how it works compared to the big name brand machines. well anyway I hope that this will register me for the contest and thanks for your time Joe.

[dirtyfarmer]

Joe--new member,
You need to read the entry rules in the first post of this thread!

[ratfink]

Hi everyone, please enter me in the contest. This is my first post, but have been registered for a few years. I would love to have a tig. Thanks, Jeff

[joejoe]

Thanks for answering one of my questions, no one commented on the quality of the equipment or wether or no you could use as a machine power source. So if no one can tell me this then I might need to look at a different product. Thanks Joe

[wruehl]

Thanks for answering one of my questions, no one commented on the quality of the equipment or wether or no you could use as a machine power source. So if no one can tell me this then I might need to look at a different product. Thanks Joe

Joe, Quality out of the box is awesome. Yes, many of their plasma cutters will adapt to CNC control. You've got some work ahead of you is you're serious about the contest, check the rules.

[performance]

Joe, our NEW PowerPlasma 60C is fully CNC ready, including torch. Give me a call.

[joejoe]

Thanks for the reply, I have a miller syncrowave 250 welder, Bridgerport milling machine, 20" vertical Band saw, 12 by 18 Horizontal band saw, and a small Lincoln 150 amp mig welder. I am trying to start a small shop and have a good start, but am wanting to get a good plasma cutter to use for hand use now, and maybe for a cnc in the future. It needs to have this option, I was reading that it may only pierce half of the rated cut capacity. Again thanks for your time Joe

[Canada]

Woo Hoo! Got my sixty posts! More actually but I but I spammed a spammer for three, so I didn't count any of those. Tried to make a point but either some people don't read the rules or sarcasm is wasted on the youth. Regardless I am too happy to care. I am sure the judges will disregard all obvious unnecessary spamming anyways.

Now for some carefree posting.

[Buzzman72]

OK, I just joined the forum...and I realize that I have no hopes of getting enough posts to be a serious contender for the contest. BUT...I worked for 5 years as a MIG weldor at a plant that made frames for Ford Explorers, so I would dearly love to have a quality MIG for home use. I've got a '52 International pickup that I'm just dying to chop the top on, and a plasma cutter and a MIG would make that job virtually cake!

[BDS]

Hello,

Register = Done
Post in this thread with intro and post count = Done (Hello all, post count = 1, this is the first)
Sig line & Avatar = Done
Please enter me in the contest.

I'm Bill,

I'm used to do more with my hands, but have been working on computers and phones for 12 years now. I'm looking forward to building a nice little shop. I would love very much to build a nice aluminum sailboat one day.