To keep from having to delete "extra" comments on the contest thread, please post all comments here. If we delete a couple there, please understand, the purpose of the thread is to enter, not to comment.
To keep from having to delete "extra" comments on the contest thread, please post all comments here. If we delete a couple there, please understand, the purpose of the thread is to enter, not to comment.
Mark
performance@everlastwelders.com
www.everlastgenerators.com
www.everlastwelders.com
877-755-9353 x204
M-F 9am - 5pm EST
A genuine thanks for the contest. You didn't have to do it and I appreciate the work involved with it.
I am out trying to 'find myself'. If I should wander back while I am gone, please tell me to sit quietly and wait for myself to return.
LOTS of scuba and vintage scuba equipment [I'm Always willing to trade or buy the stuff you think is too old to use]
Smithy XLT Mill/lathe [It was easier to learn than I thought, I'm no pro, but I can make a bearing hanger]
Everlast PP256
We'll try to keep more going on as time progresses. It does take a lot to organize them and keep things fresh. Who knows? Maybe we will repeat this one if all goes well.
Mark
performance@everlastwelders.com
www.everlastgenerators.com
www.everlastwelders.com
877-755-9353 x204
M-F 9am - 5pm EST
How do you make your signature line and avatar? I'm not that great on the computer kinda new to this forum stuff.
Thanks Ryan
Ryan,
Click on settings on the upper right hand side of your screen.
Then look on your left hand side, mid screen for the sig line and avatar. Click on them to edit them.
Signature line is the little line below the post where you can communicate your philosophy of life, favorite image and hopefully the welding product you own...Just observe some of the other guys here...you'll see.
Avatars are the little picture that represents you on the upper left corner of everyone's post. If you are still having difficulty let me know
As for you location, which we have asked that people include, edit it under your profile.
Mark
performance@everlastwelders.com
www.everlastgenerators.com
www.everlastwelders.com
877-755-9353 x204
M-F 9am - 5pm EST
Thanks for the help Mark on the avatar and the signature line, easy as pie got er done.
Hobart 140 mig
Century 300 amp AC stick
PP256
Oxy-Accetylene torch
Milwaukee 14" chop saw
Evolution compound miter cold cut saw
The spam on this board from this contest is really getting old. I use the "New Posts" function, and everyday when I come to check the forums, seems as if some new member spent half the night digging up one year old threads to post things like "really cool", "man that was great" etc. Most of them not even welding related threads. I just went through two pages of new posts, and only about 3 or 4 new posts pertained to welding or Everlast products. Come on guys, this contest has a month and a half to go still. You don't have to spam all over the board in one day to get your post count up.
Gerald
Millermatic 251
Spectrum 300 Plasma
Everlast PowerTig 250EX
Everlast PowerCool W300
Harris / Victor OA
Craftsman 13 Speed Drill Press
ProTools Air/Hydraulic Bender
48" Brake, 72" Brake, 52" Stomp Shear
Mitler Bros. 36" High Throat Bead Roller
Compressor, Notchers, Grinders, etc.
Rugar,
You are right. We have taken off a few posts already...We have spelled out that we don't want that type posting. We are not going to erase every post like that, because its hard to determine intent, but we will turn up the pressure to stop it....
So here goes: If you guys want to spam to turn up the post count, DON'T. We want serious, thoughtful and if the case be, inquisitive posting...not resurrecting old threads or reposting almost the same topics from 6 months ago...Please use the search function AND look through the first page or so of topics in each section and make sure the same post hasn't been repeated. IF you think you can contribute a worthwhile post to an older thread, go ahead....But saying "neat project" or "cool pics" ain't gonna cut it. Consider this a warning going forward, we will work to delete these comments...just trying to be fair and consistent.
Mark
performance@everlastwelders.com
www.everlastgenerators.com
www.everlastwelders.com
877-755-9353 x204
M-F 9am - 5pm EST
I hinted to one of the two already on the old post revival already. We will see if that helps. We can kill them before the contest end and rebuild the counts. Not a big deal, just more with for us.
I think this contest might cause a customer with a real problem to get a delayed response, as I too do not look at them all now. However, if you have a real problem, you should "call" for support. Mark, Ray and myself are there all week, as well I take calls on Saturday and Sunday.
Mike R.
Email: admineverlast@everlastwelders.com
www.everlastgenerators.com
www.everlastwelders.com
877-755-9353 x203
M-F 12 - 7PM PST
FYI: PP50, PP80, IMIG-200, IMIG-250P, 210EXT and 255EXT.
I am perusing the threads close enough that we should be able to take care of it. I don't mind the revival of old threads, as long as it pertains to the subject. In fact, I'd rather an old thread be resurrected and a topic continued instead of 15 threads about the same topic, because there are nuggets of information in those old threads that may not be brought out in a new one or vice versa...this will help people to have consistent source of information.
Mark
performance@everlastwelders.com
www.everlastgenerators.com
www.everlastwelders.com
877-755-9353 x204
M-F 9am - 5pm EST