Article/Blogs

The mig welding gun or torch is what creates a MIG welder a MIG.

MIG welder serves the following necessary purposes:

Welding is a process that deals with welding fumes and the welding technology has reached its peak and before nobody was willing to learn welding, but today many are interested to learn welding. In those days we don’t have any modern welding equipments and welding products, but today each and every welding type has its own welding tools and welding accessories.

Tungsten electrodes, the important welding product is known for its strength and durability. It is used because of the following properties such as a very hard, brittle, and gray to white metal that is extremely corrosion resistant. It has the highest melting point and tensile strength of any metal and it also has the lowest vapor pressure point. Tungsten is a valuable metal known and widely used in military and industrial applications. Tungsten electrodes are made of tungsten coatings and 2% thoriated tungsten has been the most commonly used tungsten material.

Mig welders are the device that is portable. It is the inverter welder machine that comes under the mig welding product and it reduces the work and satisfies all mig welding repair needs. These are the single phase welding machines and it is available in four types such as power I-MIG 160, 200, 205 and 250p and each type comes under the infineon IGBT inverter type and has input volt of 240v.

Every industry has some process that made them to develop well. Likewise welding process and welding technology is the secret behind manufacturing industries like automobile, aircraft and more, but the secret is kept unknown. The welding service is utilized from aerospace application, shipbuilding, automobile manufacturing and repairing to many other manufacturing activities. The use of aluminum and aluminum welding is mostly used in automotive industry. Apart from that electron beam welding has been used in automotive applications.

The initial thing to do is decide the size of the actual welding curtain. After that calculate and cut the metal to create a rectangle that is somewhat larger than the welding curtain without the frame. After that cut 2 pieces for the outrigger legs that support the stand for the welding monitor. Square up the rectangle and weld. Attach the base outrigger legs. I have seen a few portable welding screens that contain four big ball bearings welded on to allow them slide with no trouble in the ground.

Arc Time - Decreases arc time for each weldment by maximum of 250%.

Defects - Rework and piece are decreased significantly.

Over welding - Packing metal usage reduces by maximum of 60%.

Accuracy - Automated cutting and welding decreases clean up and get better fit-up.

Gas Usage - Shielding gases are decreased by maximum of 60%.

Deposition - Maintains packing metal deposition at the uppermost rate probable.

The process in which a bolt or specially formed nut is welded onto another is called stud welding. In the spot welder, the bolts may be automatically fed into the spot welder. Weld is formed when the weld nuts which have a flange with small nubs is melted. Similarly the studs would be having a necked down, un-threaded area for the same purpose.

Stick welding accounts for almost over half of all welding and is one of the most popular welding process. It has maintained a dominant position in the maintenance and repair industry due to its versatility and simplicity. The stick welder is heavily used in the construction of steel structures and in industrial fabrication.

* Clean as best as you are able to with acetone and carbide burr.... an uncouth burr that wont load up.

* make use of az101 filler rod.

* preheat to approximately 300f.

* make use of similar tig machine settings as for aluminum.

* light up and boost amperage until it hardly puddles. If it does not puddle dirt free stop, burr, wire brush, do again as many times as needed to get it to puddle dirt free.