SM100N Spool Gun

SM100N Spool Gun is designed to fit Cyclone 140E and 200ES units with Euro-style Connector.  Can be used with older Power i-MIG  140E and 200E welders.

• Rated for 135A with 35% Duty Cycle, which is comparable to other guns this size.
• Serrated drive roll feeds 40XX and 50XX series aluminum wire.  
• Can be used to feed flux core wires.
• Euro-style Connector connects to the gun connection on the welder.
• Common type consumables interchange with similar "SP-M8" type guns.
• Roll diameter max: 4".
• 20 ft. cable for extended length welding when standard gun is not long enough.
• The motor power connector that connects the control wire for the 140E/200ES to the welder is pre installed.
• Use with .030"-.035" diameter wire (use .035" for aluminum for best results)
• See through plastic  cover allows you to view wire roll and remaining wire without opening side cover.
• Good for welding metals between 1/8" to 3/16" (140E). Up to 1/4" max (200ES)
• Recommended for current models:
  • Cyclone 140E
  • Cyclone 200E(S)

Recommended for Older:

• Power i-MIG 140E
• Power i-MIG 200E